Getting Started - Pioneer DVR-LX61D Operating Instructions Manual

Getting started

• The country setting will apply to both the
digital and analog TV tuners.
• The clock will also be set automatically
here if D.TV channels are found.
• If no new channels were found a
message appears asking if you want to
scan again. Check the aerial connection
before selecting Yes. (If you select No,
skip to step 8 below.)
ENTER
8 Select the analog TV (A.TV)
Auto Channel Setting ('Auto Scan' or
'Download from TV'), or 'Do not set'.
k Setting Auto Channel Setting
Line System
er Save Auto Scan English
P Download from TV
p Navigator p Navigator Do not Set
• Select Do not set if you want to skip
channel setup (because they have
already been set up, for example).
• You can only use the Download from
TV feature if this recorder is connected
to your TV using a fully-wired 21-pin
SCART cable via the AV1 (RGB)-TV
connector, and if your TV supports this
function (check your TV's instruction
manual for more details).
ENTER
• Select your country.
k Setting k Setting Country Selection
t Line System
t Line System
er Save er Save Country
P
• Auto-tuning channels
The Auto Scan option automatically scans
and sets the channel presets.
Tuning
Cancel
UK
32/99
• Downloading channels from your TV
Use the Download from TV option to
download all the channels that your TV is
tuned to.
Downloading
Cancel
ENTER
9 Select 'Auto' for automatic
time setting, or 'Manual' to set the clock
manually.
If the clock was already set from a D.TV
channel in step 6, this step is skipped.
k Setting Clock Setting
Line System
er Save Auto Auto
P Manual
• Auto clock setting
Some TV channels broadcast time
signals together with the programme.
This recorder can use these signals to
set the clock automatically.
Set 'Clock Set CH' to the channel
preset number that broadcasts a time
signal, then move the cursor down to
'Start' and press ENTER.
k Setting Auto Clock Setting
Line System
Date – – / – – / –– – –
er Save
Time – – : ––
P
p Navigator p Navigator
Clock Set CH
The recorder takes a short while to set
the time. After you see that it's set, select
Next to proceed.
k Setting Auto Clock Setting
t Line System
Date T U E 01 / 0 1 / 20 08
er Save
Time 1 1 : 20
P
p Navigator p Navigator
Clock Set CH
If the time could not be set
automatically, press RETURN/EXIT to go
back to the previous screen and select
Manual.
Pr 5
32/99
P r 1
S t a rt
P r 1
S ta r t
N e xt
04
33
En