Pioneer DVR-LX61D Operating Instructions Manual page 160

Additional information
19
Problem
The device connected
to the USB port is not
recognized
The power
automatically turns on
A video file recorded
on the unit's HDD is
played automatically
160
En
Remedy
• Check that the device is compatible with this recorder (page 23).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Try switching this recorder into standby mode and then back on.
• Try using the Restart USB Device option from the Initial Setup menu
(page 149).
• If several USB devices (camera, USB memory, card reader, etc.) are
connected at the same time, it's possible that only the first device
connected to this recorder will be recognized.
• Set the Demo Mode to Off after performing the Setup Navigator
(page 149).
• Set the Demo Mode to Off after performing the Setup Navigator
(page 149).