Table of Contents
Advertisement
High Speed Pan/Tilt System
5
Connecting the Washer Pump (optional)
The High Speed Pan/Tilt System may have an optional washer pump. To connect the washer
pump for the HAC-WAS05-20, HAC-WAS05-50, and HAC-WAS30-50, proceed as follows:
1.
Fig. 5.1 Installing the Washer Cables
1
2
3
4
5
6
7
8
Bosch Security Systems
The device must be wired by skilled technical personnel. Never make any
!
changes or connections that are not described in this handbook. Failure to fol-
low the instructions indicated in this manual may result in system or safety
hazards, thus invalidating the guarantee.
Attach the mount, (optional wall or pole mount) by positioning the washer pipe support
in the desired position (see Figure 5.1).
Reference #
Description
Base
Cable Glands
Washer Pipe Support
Gasket
Screw Seals
Bracket or Pole Support
Washers
Screws
Connecting the Washer Pump (optional) | en
2
5
6
7
8
Instruction Manual
1
3
4
F01U.073.990 | Version 1.0 | 2007.07
17
Advertisement
Table of Contents
