AUTODOME IP 4000 HD / AUTODOME Table of Contents | en IP 5000 HD/IR Table of contents Configuration Prerequisites System overview Live page Playback Configuration Operation via the browser Live page 3.1.1 Connection 3.1.2 3.1.3 Prepositions 3.1.4 AUX Control 3.1.5 Digital I/O 3.1.6...
Page 4
AUTODOME IP 4000 HD / AUTODOME en | Table of Contents IP 5000 HD/IR 6.13 Prepositions and Tours 6.14 Sectors 6.15 Miscellaneous 6.16 Illuminator 6.17 Audio 6.18 Pixel Counter Recording Storage Management 7.1.1 Device manager 7.1.2 Recording media 7.1.3 Activating and configuring storage media 7.1.4...
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address. Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. Notice! Depending on the PC network security settings, the user may need to add the new IP address to the browser’s trusted sites list for the controls to operate.
Page 6
AUTODOME IP 4000 HD / AUTODOME en | Configuration Prerequisites IP 5000 HD/IR Select Network Access. The page Network Access opens. Configure the settings on this page based on the addresses provided by your local network administrator. Click Set and Reboot. The camera will reset (go through the homing sequence, which usually takes 30 seconds to complete), and then the Live page appears, with updated video and the new IP address.
AUTODOME IP 4000 HD / AUTODOME System overview | en IP 5000 HD/IR System overview When a connection is established, the Live page is initially displayed. The application bar displays the following items: – Live, – Playback, This link is only visible if a storage medium has been configured for recording. (With VRM recording this option is not active.)
AUTODOME IP 4000 HD / AUTODOME en | Operation via the browser IP 5000 HD/IR Operation via the browser Live page After the connection is established, the Live page is initially displayed. It shows the live video image on the right of the browser window. Depending on the configuration, various text overlays may be visible on the live video image.
AUTODOME IP 4000 HD / AUTODOME Operation via the browser | en IP 5000 HD/IR 3.1.4 AUX Control Show preposition Click this button to display a preposition. Set preposition Click this button to set a preposition. AUX on Click this button to activate an AUX command.
AUTODOME IP 4000 HD / AUTODOME en | Operation via the browser IP 5000 HD/IR 3.1.9 Recording live video Video sequences from the displayed live video stream can be saved locally on the computer's hard drive. The sequences are recorded at the resolution specified in the encoder configuration.
AUTODOME IP 4000 HD / AUTODOME Operation via the browser | en IP 5000 HD/IR 3.1.13 Status icons Various overlays in the video image provide important status information. The overlays provide the following information: Decoding error The frame might show artifacts due to decoding errors.
AUTODOME IP 4000 HD / AUTODOME en | Operation via the browser IP 5000 HD/IR Click the Dewarping arrow to see the options. Select E-PTZ or Off. To view a recording stream: Click the Recording arrow to see the options.
AUTODOME IP 4000 HD / AUTODOME en | General IP 5000 HD/IR Enter the password for the appropriate authorization level here. Confirm password In each case, enter the new password a second time to eliminate typing mistakes. Notice! A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.
AUTODOME IP 4000 HD / AUTODOME General | en IP 5000 HD/IR Select other values from the list fields below the table to change the entry. Changes are made immediately. If there are empty lines at the bottom of the table, for example after deletions, you can add new data by marking the row and selecting required values from the list fields.
AUTODOME IP 4000 HD / AUTODOME en | General IP 5000 HD/IR Alarm mode stamping Select On to display a text message overlay in the image in the event of an alarm. It can be displayed at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.
Page 17
AUTODOME IP 4000 HD / AUTODOME General | en IP 5000 HD/IR Heartbeat timeout Enter the value (in seconds) for the heartbeat timeout. The default is 15. Server ID Enter the ID of the server. Server IP address Enter the server IP address.
AUTODOME IP 4000 HD / AUTODOME en | Web Interface IP 5000 HD/IR Web Interface Appearance Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The image file can be stored on a local computer, in the local network or at an Internet address.
Page 19
AUTODOME IP 4000 HD / AUTODOME Web Interface | en IP 5000 HD/IR Allow local recording Here you can specify whether the icon for saving (recording) video sequences on the local memory should be displayed below the live image. Video sequences can only be saved if this icon is visible.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR Camera Installer Menu Base frame rate This option allows you to set the frame rate that the camera uses to transmit video. Select either 25 ips or 30 ips. If you select 25 ips, the camera will stream video at 25 or 50 ips. If you select 30 ips, the camera will stream video at 30 or 60 ips, depending on the option selected in the Encoder Stream.
– Vibrant Note: When the camera is in an indoor room that often has smoke or has low-contrast and the camera monitors an area facing the outdoors (such as large windows), Bosch recommends to select mode Outdoor. Mode ID The name of the selected mode is displayed.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR Option in field Additional Additional fields for NOTES “White balance” Input field configuration Sodium vapor auto RGB- R-weight weighted G-weight white B-weight balance Dominant color auto RGB- R-weight...
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR Select the range within which the ALC will operate. A positive value is more useful for low- light conditions; a negative value is more useful for very bright conditions.
Select Off to disable the feature. Note: When the camera is in an indoor room that often has smoke or has low-contrast and the camera monitors an area facing the outdoors (such as large windows), Bosch recommends to select option Auto.
Page 25
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR Profile name Default Profile name Description HD Image Optimized For an HD image, the video bit rate and frame quality are adjusted to ensure that the picture quality is the priority.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR Options are IP, IBP, and IBBP. Averaging period Select the appropriate averaging period as a means of stabilizing the long term bit rate. I-frame distance This parameter allows you to set the intervals in which the I-frames will be coded. Auto means auto mode, whereby the video server inserts I-frames as necessary.
Page 27
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR Recording is currently active. Therefore, for ‘Current profile’ the respective stream profile selected for recording is displayed for information. Property Select one of the H.264 standards for each stream.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR Default Profile name Description DSL Optimized Ideal for encoding on a DSL uplink where bit rate limitations are critical. 3G Optimized Ideal for encoding on a 3G uplink where bit rate limitations are critical.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR 6.10 Privacy Masks Privacy Masking is used to block out a specific area of a scene from being viewed. Masks can be configured as a gray area with four corners. You may define a total of 24 privacy masks.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR Digital zoom Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital video image. It is accomplished electronically, without any adjustment of the camera's optics, and no optical resolution is gained in the process.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR Click the View Control link, under the image cameo, to access the directional and zoom controls. Use the View Control dialog box to make the necessary camera movements.
AUTODOME IP 4000 HD / AUTODOME en | Camera IP 5000 HD/IR – Use the PTZ controls to navigate to the new preposition. – In the list Prepositions, select the preposition that you want to overwrite. – Click the button Overwrite preposition (disk icon) to apply the new preposition to the existing preposition.
AUTODOME IP 4000 HD / AUTODOME Camera | en IP 5000 HD/IR IR Operation Range Select the zoom factor or range for the IR light: – 1X-30X (default) – 5X-30X – 10X-30X – 20X-30X Spotlight mode Select On to set the camera in spotlight mode. By default, this option is Off.
AUTODOME IP 4000 HD / AUTODOME en | Recording IP 5000 HD/IR Recording Storage Management 7.1.1 Device manager An external Video Recording Manager (VRM) system for the unit is configured via the Configuration Manager. The Managed by VRM box is only an indicator; it cannot be changed here.
AUTODOME IP 4000 HD / AUTODOME Recording | en IP 5000 HD/IR Check the box in the Rec. 1 or Rec. 2 column to specify the recording tracks to be recorded on the target selected. 7.1.4 Formatting storage media All recordings on a storage medium can be deleted at any time. Check the recordings before deleting and back-up important sequences on the computer's hard drive.
Notice! For more information, please see the Alarm Task Script Language document and the RCP+ documentation. For the latest version of these documents access your Bosch product catalog on the Internet. Export to account Select this parameter if you want all alarm recordings to be exported to an FTP server automatically.
AUTODOME IP 4000 HD / AUTODOME Recording | en IP 5000 HD/IR You can link any number of 15-minute intervals with the recording profiles for each day of the week. Moving the mouse cursor over the table displays the time below it. This aids orientation.
VIDOS or Bosch Video Management System, you can store a general password here. The camera can use this general password to connect to all remote stations protected with the same password.
Page 39
AUTODOME IP 4000 HD / AUTODOME Alarm | en IP 5000 HD/IR Caution! Please note that in some circumstances, a larger bandwidth must be available on the network for additional video images in the event of an alarm, in case Multicast operation is not possible.
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD/IR Audio Select On to activate audio alarms. VCA configuration Select one of the profiles here to activate it or edit it. You can rename the profile. To rename the file, click the icon to the right of the list field and enter the new profile name in the field.
AUTODOME IP 4000 HD / AUTODOME Alarm | en IP 5000 HD/IR Global change You can set how large the global change in the video image must be for an alarm to be triggered. This setting is independent of the sensor fields selected under Select Area. Set a high value if fewer sensor fields need to change to trigger an alarm.
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD/IR Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. In this way it is possible to notify a recipient who does not have a video receiver. In this case, the camera automatically sends an e-mail to a previously defined e-mail address.
AUTODOME IP 4000 HD / AUTODOME Alarm | en IP 5000 HD/IR Alarm Task Editor Caution! Editing scripts on this page overwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. In order to edit this page, you must have programming knowledge and be familiar with the information in the Alarm Task Script Language document.
Page 44
AUTODOME IP 4000 HD / AUTODOME en | Alarm IP 5000 HD/IR – AUX Off: defines a standard or custom keyboard OFF command. – Scene: defines a preset scene from shot 1-256. – Monochrome: switches the camera video to monochrome mode.
AUTODOME IP 4000 HD / AUTODOME Interfaces | en IP 5000 HD/IR Interfaces Alarm Inputs Alarm input Select N.O. if the alarm is to be triggered when the contact closes. Select N.C. if the alarm is to be triggered when the contact opens.
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the camera. Certain applications (Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...
Page 47
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD/IR TCP rate control Select On to control the rate of transmission control protocol. Select Off if you do not want to control the TCP rate. HTTP browser port Select a different HTTP browser port from the list if required.
AUTODOME IP 4000 HD / AUTODOME en | Network IP 5000 HD/IR 10.2 DynDNS Enable DynDNS DynDNS.org is a DNS hosting service that stores IP addresses in a database ready for use. It allows you to select the camera via the Internet using a host name, without having to know the current IP address of the unit.
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD/IR Identity Enter the name that the RADIUS server is to use for identifying the camera. Password Enter the password that is stored in the RADIUS server. TCP port The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata.
AUTODOME IP 4000 HD / AUTODOME en | Network IP 5000 HD/IR The priority of the different data channels can be set by defining the DiffServ Code Point (DSCP). Enter a number between 0 and 252 as a multiple of four. For alarm video you can set a higher priority than for regular video and you can define a Post Alarm Time over which this priority is maintained.
AUTODOME IP 4000 HD / AUTODOME Network | en IP 5000 HD/IR Streaming Click the checkbox to activate multicast streaming mode for the relevant stream. An enabled stream is indicated by a check mark. Multicast packet TTL You can enter a value to specify how long the multicast data packets are active on the network.
AUTODOME IP 4000 HD / AUTODOME en | Network IP 5000 HD/IR 10.7 Accounts Four separate accounts can be defined for posting and recording export. Type Select either FTP or Dropbox for the account type. Before using a Dropbox account ensure that the time settings of the device have been correctly synchronized.
AUTODOME IP 4000 HD / AUTODOME Service | en IP 5000 HD/IR Service 11.1 Maintenance Update server The address of the update server appears in the address box. Click Check to make a connection to this server. Select the appropriate version for your camera to download the firmware from the server.
AUTODOME IP 4000 HD / AUTODOME en | Service IP 5000 HD/IR EAP-TLS client Select the client for Extensible Authentication Protocol-Transport Layer Security (EAP-TLS). Note: The only option may be “None.” EAP-TLS trusted Select the trusted certificate for Extensible Authentication Protocol-Transport Layer Security (EAP-TLS).
– Autofocus does not activate if the camera is moving between pre positions. – Bosch recommends that users turn off Autofocus when the camera is moving at very high speed (>60⁰/second). – Autofocus compensates for focus distortion from the camera bubble.
AUTODOME IP 4000 HD / AUTODOME en | AUX Commands IP 5000 HD/IR AUX Commands AUX Commands Table Function Description Notes On/Off AutoPan (Continuous) On/Off Run Custom Pre-Position Tour On/Off Run Pre-Position Tour On/Off AutoPivot Enable On/Off Backlight Compensation (BLC)
AUTODOME IP 4000 HD / AUTODOME AUX Commands | en IP 5000 HD/IR Function Description Notes 1-256 Set/- Pre-position Programming 1-256 -/Shot Pre-position Recall Bosch Security Systems Operation Manual 2016.04 | 0.4 |...