Area Parameters Menu - Bosch UPH-2D Series Instruction Manual

High Speed Pan/Tilt System
11.2.1

Area Parameters Menu

The Area Parameters menu enables the user to show a message on the screen, depending on
the horizontal position reached by the device; this is sometimes known as sector information.
From this menu, it is possible to enter two (2) lower menus that are used to set the text for
each area, and the start and end positions (in degrees) of these areas. It is possible to set up
to eight (8) areas with their own title, start, and end positions.
For example, to activate the first title and obtain a message when the device is between +80 °
and +120 ° in the horizontal (pan) direction, proceed as follows:
1.
2.
3.
Note: If the area position start and end values are set to +0.00, this disables the text display.
Fig. 11.4 Area Parameters Menu
AREA TITLE
STRING AREA MENU
POSITION AREA
MENU
OFFSET PAN
Bosch Security Systems
Enter the Position Area menu.
Select Area 1 by pressing Focus; an arrow starts blinking next to the start position. Press
Focus again, use the joystick to enter the value +080.00 in the left column (start position
of text coming on screen), then press Focus to store that value. Repeat the process, but
put +120.00 in the right column (stop position of text removed from the screen).
In the Text (String) Area menu, select the first line and enter the desired text.
AREA PARAMETERS MENU
1 - AREA TITLE : NO
2 - STRING AREA MENU
3 - POSITION AREA MENU
8 - OFFSET PAN : + 0.0
Feature
Enables / disables the on-screen message
depending on the horizontal position reached
by the device.
Enables the user to edit a customized, on-
screen text message that is activated when the
device reaches a defined, horizontal position.
The horizontal position reached by the device
that prompts a customized on-screen text
message.
Adds a corresponding value (offset) in degrees
to the pan references used for displaying the
area text. For example, if this value is set to
+45.0 ° then all references will be shifted in
PAN by +45 ° with respect to the system's
physical reference.
TEXT AREA MENU
1 - AREA 1
2 - AREA 2
3 - AREA 3
4 - AREA 4
5 - AREA 5
6 - AREA 6
7 - AREA 7
8 - AREA 8
Test area 1
AREA POSITION MENU
1 - AREA 1 + 0.0 + 0.0
2 - AREA 2 + 0.0 + 0.0
3 - AREA 3 + 0.0 + 0.0
4 - AREA 4 + 0.0 + 0.0
5 - AREA 5 + 0.0 + 0.0
6 - AREA 6 + 0.0 + 0.0
7 - AREA 7 + 0.0 + 0.0
8 - AREA 8 + 0.0 + 0.0
Test area 1
Description
Instruction Manual
Configuring the System | en
EDIT TEXT MENU
1 - STRING EDIT
------------------------------------------
Test area 1
------------------------------------------
2 - DELETE STRING
Default
NO
+0.00
F01U.073.990 | Version 1.0 | 2007.07
37
Options
YES, NO
-180.00
to
+180.00