Bosch UPH-2D Series Instruction Manual page 41

High Speed Pan/Tilt System
PAN SPEED 1
PAN SPEED 2
PAN SPEED 3
PAN SPEED 4
PAN SPEED 5
PAN SPEED 6
PAN SPEED 7
The data is expressed as degrees per second.
TILT SPEED 1
TILT SPEED 2
TILT SPEED 3
TILT SPEED 4
TILT SPEED 5
TILT SPEED 6
TILT SPEED 7
The data is expressed as degrees per second.
Zoom dependent speed by default is turned off. When the zoom-dependent function is turned
off, then the pan and tilt speeds of the UPH are unaffected by the zoom measurement of the
camera/lens combination. If the zoom-dependent function is turned on, the zoom measure-
ment of the camera/lens combination affects the pan and tilt speeds. This is useful when the
zoom is in telephoto (i.e. zoomed in); it slows down the pan and tilt speeds so that very fine
adjustments can be made to follow moving subjects.
Bosch Security Systems
Feature
Correspondance between joystick
position and UPHspeed. Joystick
positions have been divided into 7
levels for both axis (pan & tilt);
each level corresponds to a
defined speed which can be modi-
fied by the user.
Feature
Correspondance between joystick
position and UPHspeed. Joystick
positions have been divided into 7
levels for both axis (pan & tilt);
each level corresponds to a
defined speed which can be modi-
fied by the user.
Instruction Manual
Description
1.0
2.0
5.0
10.0
20.0
30.0
40.0
Description
1.0
2.0
3.0
5.0
8.0
10.0
20.0
Configuring the System | en
Default Options
0.1-100.0
0.1-100.0
0.1-100.0
0.1-100.0
0.1-100.0
0.1-100.0
0.1-100.0
Default Options
0.1-40.0
0.1-40.0
0.1-40.0
0.1-40.0
0.1-40.0
0.1-40.0
0.1-40.0
F01U.073.990 | Version 1.0 | 2007.07
41