Table of Contents
Advertisement
54
en | Configuring the System
Auto Exposure Parameters Menu
The Auto Exposure Parameters menu is used to control the iris of the UPH-Z Series. In Auto-
matic mode the iris of the camera/lens combination automatically reacts to light level
changes. In Manual mode the user has full control of the iris.
1 -
Fig. 11.23 AE Parameters Menu
MODE
Parameters Mode - Infrared Menu
The Parameters Mode - Infrared Menu controls how the IR-cut filter of the camera/lens com-
bination reacts to light changes.
1 - INFRARED MODE ENABLING
2 - AUTOM. INFRARED MODE
3 - INFRARED DELAY TIME
4 - ICR OFF AE LEVEL
Fig. 11.24 Parameters Mode Menu
INFRARED MODE
ENABLING
AUTOM. INFRARED
MODE
INFRARED DELAY TIME Delayed recognition of daylight
ICR OFF AE LEVEL
Dynamic Masking (UPH-Z Series only)
With dynamic masking, it is possible to create up to 24 masks so as to hide specific areas
defined by the user. The masks are defined in the space and take into account the horizontal,
vertical, and depth position of the zoom at the time of the setting.
The UPH automatically holds the position and the size of the masking, according to the area
displayed.
F01U.073.990 | Version 1.0 | 2007.07
AE PARAMETERS
MODE:
AUTOMATIC
Feature
Type of exposure control
PARAMETERS MODE - INFRARED
Feature
Continuous activation of infrared
mode.
Enables the automatic function
with automatic switching to infra-
red mode.
(color) mode; the parameter is
shown in seconds.
Changes the point of switching the
IR-cut filter (ICR) between day and
night time. The lower the value,
the earlier the ICR changes (i.e.
more sensitive to low light).
Description
NO
YES
025
16
Description
Instruction Manual
High Speed Pan/Tilt System
Default
Options
AUTOMATIC
Default
Options
NO
YES, NO
YES
YES, NO
25
005 - 255
16
1, 10, 16, 18,
20, 22, 24, 26
Bosch Security Systems
Advertisement
Table of Contents
