Limits - Bosch UPH-2D Series Instruction Manual

42 en | Configuring the System
11.3.2

Limits

The Limits menu sets the movement limits for the UPH. These limits apply to all presets, auto-
pan and patrols, including manual operation of the UPH using the joystick. After the limits are
set in the OSD and the UPH moves into the "limited pan and tilt zone", it will not move outside
of those limits until they are altered in the OSD or the UPH is reset. On reset, the UPH returns
to within the limited pan and tilt zone.
Fig. 11.10 Limits Menu
.
ENABLE PAN LIM.
START PAN
END PAN
ENABLE TILT LIM.
START TILT
END TILT
COMPL. ROTATION
RAMP TYPE
F01U.073.990 | Version 1.0 | 2007.07
LIMITS MENU
1 - ENABLE PAN LIM. :
2 - START PAN : + 0.00
3 - END PAN : + 0.00
4 - ENABLE TILT LIM. :
5 - START TILT : + 0.00
6 - END TILT : + 0.00
7 - COMPL. ROTATION :
8 - RAMP TYPE :
Feature
Enables limits and values in
degrees taken by the device in
pan.
Enables or disables complete rota-
tion for scan/patrol/autopan move-
ments (this function is useful when
using accessories with external
cables, such as infrared spotlights,
where continuous rotation of the
UPH could break the accessories
themselves).
Enables the location that the UPH
begins to pan.
Enables the location that the UPH
stops panning.
Enables limits and values in
degrees taken by the device in tilt.
Enables the location that the UPH
begins to tilt.
Enables the location that the UPH
stops tilting.
Enables the search for the shortest
route during scan, patrol, and
autopan movements.
Changes start and stop times for
the UPH. The higher the number,
the greater the acceleration/decel-
eration during starting/stopping.
NO
NO
YES
012
Description
Instruction Manual
High Speed Pan/Tilt System
Default Options
NO YES, NO
+0.00 °
-180.00 -
°
+180.00
+0.00 °
-180.00 -
°
+180.00
NO YES, NO
°
+0.00
-40.00 -
°
+90.00
+0.00 °
-40.00 -
°
+90.00
YES YES, NO
012 000 - 012
Bosch Security Systems