40
en | Configuring the System
11.3
Motion Parameters Menu
The Motion Parameters menu is used to control the speed, limits, preset/patrol/autopan,
wiper-washer, and the alarm settings of the UPH.
Fig. 11.8 Motion Parameters Menu
11.3.1
Speed Menu
The Speed menu is used to control the pan and tilt movement of the UPH in manual control
mode using the joystick. See Figure 11.3.3 for setting pan & tilt speeds for the presets,
patrols, and scans.
.
Fig. 11.9 Speed Menu
F01U.073.990 | Version 1.0 | 2007.07
MOTION PARAMETERS MENU
1 - SPEEDS
2 - LIMITS
3 - PRESET/PATROL/AUTOPAN
4 - WIPER-WASHER
5 - ALARMS
SPEED MENU
1 - PAN SPEED
2 - TILT SPEED
3 - ZOOM DEPENDENT
NO
SPEED
PAN SPEED MENU
1 - SPEED 1...
0.6
2 - SPEED 2...
1.0
3 - SPEED 3...
6.0
4 - SPEED 4...
10.0
5 - SPEED 5...
20.0
6 - SPEED 6...
30.0
7 - SPEED 7...
40.0
8 - DEFAULT
TILT SPEED MENU
1 - SPEED 1...
0.6
2 - SPEED 2...
1.0
3 - SPEED 3...
6.0
4 - SPEED 4...
10.0
5 - SPEED 5...
20.0
6 - SPEED 6...
30.0
7 - SPEED 7...
40.0
DEFAULT
Instruction Manual
High Speed Pan/Tilt System
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
gr./s
Bosch Security Systems