Table of Contents
Advertisement
High Speed Pan/Tilt System
5.1
Connecting the Peripherals
The base has a 19-pin connector for which the following connections are illustrated:
Fig. 5.6 Base with 19-pin Connector for Connecting Peripherals
RS-485-2
Video
O1-C1 and
O2-C2
A1, A2, A3,
and A4
B+ and B-
Bosch Security Systems
Reference
Dedicated communication port for Pelco D
(2400 baud, 8N1)
Composite video out 1 Vpp
Clean output contacts that can be activated by
alarm or by user (50 VDC or 30 VAC @ 1A)
Alarm in, voltage-controlled (10-35 VDC),
referred to common COM
Biphase communication lines
CAUTION! The system is TNV-1 type, do not connect to SELV circuits.
!
Connecting the Washer Pump (optional) | en
Description
Instruction Manual
F01U.073.990 | Version 1.0 | 2007.07
21
Advertisement
Table of Contents
