Table of Contents
Advertisement
40
en | Configuration using a Web browser
You can then view, edit and print this file with any text editor or the standard Office software.
File for system log
1.
2.
5.16
Advanced Mode: Picture Settings
You can set the polarity of the thermal image of the camera to suit your requirements. The
current video image is displayed in the small window next to the radio buttons as
confirmation. Your changes are effective immediately.
1.
2.
5.17
Advanced Mode: Encoder Profile
You can change the names and individual parameter values for the encoder profiles.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
DOC | V4.5 | 2010.09
Enter the path for saving the system log here.
If necessary, click Browse to find a suitable directory.
Select the required polarity.
Click View Control... under the video window to control the camera when mounted on a
pan/tilt.
Installation and Operating Manual
VOT-320
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
