Connecting Wires to the Pipe Interface Board Attach Pendant to Pipe and Tighten Cable and Wire Standards Power Wire Distance Guide for Pendant Video and Control Cables Audio Cables Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 4
Advanced Mode: Web Interface 7.14 Appearance 7.15 Livepage Functions 7.16 Logging 7.17 Advanced Mode: Camera 7.18 Installer Menu 7.19 Encoder Profile 7.20 Encoder Streams 7.21 Privacy Masks 7.22 Camera Settings F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 5
Bubble Handling and Cleaning Handling Cleaning 8.2.1 Cleaning the Bubble Interior 8.2.2 Cleaning the Bubble Exterior BVIP Firmware Updates Upgrading the AutoDome 800 Series Beginning the Firmware Update Process Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 6
| Table of Contents AutoDome 800 Series HD PTZ Camera Keyboard Commands by Number Index F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
ON/OFF switch is in the ON position. The power cord is the main power disconnect device for switching off the voltage for all units. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 8
17. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 10
Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/EC. Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
Page 11
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone Network Voltage (TNV) circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
Page 12
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING- RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
AutoDome 800 Series HD PTZ Camera Safety | en Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Telephone: 800-366-2283 or 585-340-4162 Fax: 800-366-1329 Email: cctv.repair@us.bosch.com...
Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. See Section 1.4 Customer Support and Service, page 13 for contact information.
No. 2 Phillips screwdriver – Socket wrench and 9/16-in. socket – Banding tool (Bosch P/N TC9311PM3T) - if installing a mast (pole) mount – 3/4 in. (20-mm) NPS right angle conduit connector - if installing a mast (pole) mount with a VG4-ARMPLATE...
Mast Plate to the pole. Contact your Bosch Sales Representative to order Banding Tool P/N TC9311PM3T. Secure the Power Supply Box to the Corner Plate or Mast Plate using the four (4) 3/8 x 1- 3/4-inch bolts and split lock washers (supplied).
Cut and trim all wires with sufficient slack to reach their connector terminals in the box, but not so long as to be pinched by or to obstruct closing the Pendant Arm. See Figure 2.2, Page 17, above, for the connector locations. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 18
Alarm Input 1 (A3) Brown Not used Brown Alarm Input 2 (A4) Orange Relay Out 1 Orange Not used Green Relay Ground Green Not used Yellow Not used Blue Alarm Ground (AGND) F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
115 V T 1.6 A T 2.0 A T 3.15 A 230 V T 0.8A T 2.0 A T 3.15 A The following table lists the Power Supply Box connectors: Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 21
Connect the third wire to pin 3 (Earth Ground) connector. Refer to connector P107 in Table 2.2 and to the image below for an illustration of these connections: Figure 2.7 Outgoing 24 VAC power supply Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
The bottom hinge pin of the Pendant Arm is provided with a Hinge Pin Stop to hold the hinge open while attaching the arm to the Power Supply Box. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Make Connections in Power Supply Box Refer to Table 2.2, Page 21 to locate the various connectors in the power supply box and make the following connections detailed below. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 24
To connect alarm Inputs and the alarm output, connect the 4-pin Alarm Out and the 6-pin Alarm In connectors from the Pendant Connector Harness to their mating connectors, installed previously, to the incoming alarm wires. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 25
NOTICE! After all wiring is complete, close the cover door and tighten the two (2) captive screws on the cover door to 10-12 N-m (90-105 in.-lbs) to ensure the Power Supply Box is watertight. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Follow the instructions provided with the banding tool to securely mount the Mast Plate to the pole. Contact your Bosch Sales Representative to order Banding Tool P/N TC9311PM3T.
Pendant Arm to the Mounting Plate. 2.8.2 Route and Connect Wires to a Power Supply Box The illustration below depicts the power and control cables connected to the Pendant Arm: Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 28
Plate. For a mast mount, route all wires through the right-angle conduit. Attach the water-tight plug to the other conduit. Attach the grounding spade terminal (item 1, below) to one of the spade terminals inside the Mounting Plate. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 29
Refer to Section 4 Cable and Wire Standards, page 51, for detailed wire and connection information. 11. Attach the 6-pin Audio In mating connector to the Audio In (cable 8) cable. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 30
AutoDome Installation procedure. NOTICE! After all wiring is complete, close the cover door and tighten the two (2) captive screws on the cover door to 10-12 N-m (90-105 in.-lbs). F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Arm hinge pin, allowing the dome to rotate around the pin. Rotate the dome housing down to a vertical position and gently push upward to engage the connector on top of the dome housing. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 32
10-12 N-m (90-105 in.-lbs). CAUTION! You must tighten the two mounting screws to a minimum torque of 10-12 N-m (90-105 in.-lbs) to ensure a proper seal between the arm and the housing. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
The VG4-A-9230 Series are stationary mounts intended for rooftop parapet vertical walls. They are made of light weight aluminum with a corrosion-resistant finish and are used for all Bosch AutoDome Camera systems up to a rated load of 29 kg (64 lb). These mounts can be fitted to the inside or outside of parapet walls and can swivel for ease of positioning and for servicing the AutoDome.
NOTICE! Use 3/4-inch NPS (20-mm) fittings for the holes on the bottom and back of the box. Use 1/2-inch NPS (15-mm) fittings for the side holes. See Section 3.1.1 Parts List, page 33, for an illustration. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 35
Attach the 3/4 in. (20 mm) watertight pipe fittings (not supplied) to the holes of the Power Supply Box through which you will run the power, video, and control data wires. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
NOTICE! After all wiring is complete, close the cover door and tighten the two (2) captive screws on the cover door to 10-12 N-m (90-105 in.-lbs) to ensure the Power Supply Box is watertight. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
The second method is to bypass the Power Supply Box and route the ethernet and alarm wires directly to the Interface Board. You connect only the power wires inside the Power Supply Box. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 38
Earth Ground 24 VAC Power Out 24 VAC Power In (to AutoDome) P107 Connector 24 VAC Power In (to Heater) 24 VAC Power In (to Heater) AutoDome Power Heater Power F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Pipe Interface Board. 3.4.2 Wiring the Fiber Optic Model If installing a Fiber Optic model, bring the fiber optic cable into the right side of the power supply box. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 40
AutoDome 800 Series HD PTZ Camera (GND) 24V NC GND TXD RXD C+ C- Transformer In/Out Ethernet to Dome ST Connector (Fiber) In/Out Power In From Arm Harness Data In/Out F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
115 V T 1.6 A T 2.0 A T 3.15 A 230 V T 0.8A T 2.0 A T 3.15 A The following table lists the Power Supply Box connectors: Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Provide enough slack in the wires to rotate the pipe arm over the roof and back when camera maintenance is required. Prepare the mounting surface for the type of fastener by drilling holes for the mounting anchors as required. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 43
Remove the End Cap from the front of the arm and feed the video, control, and power wires up through the bottom of the pipe arm and out the front end. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 44
Thread Sealant or tape Dome Cap 11. Run a bead of RTV Silicon sealant around the down pipe/Dome Cap interface to seal any gaps between the down pipe and the Dome Cap. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Make sure all surfaces are clean and dry. – Apply a bead of sealant completely around the leading threads of the male fitting. – Force the adhesive into the threads to thoroughly fill all voids. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
To connect alarm inputs and outputs, attach the supplied 6-pin Alarms In and the 4-pin Alarms Out connector plugs with flying leads to the appropriate alarm wires. Then connect the plugs to their mating connectors P103 and P102 on the Pipe Interface Board. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 48
Dome Cap. CAUTION! Be careful not to strip the threads when tightening the Pipe Interface Board retaining screws. Figure 3.12 Pipe Interface Board to Dome Cap Assembly F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Dome Cap. Figure 3.13 Pendant to Roof / Pipe Mount Attachment Tilt Dome. Hook and drop. 2a Dome Cap 2b Recessed Hinge Pin Dome Connector Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 50
Tighten the three (3) 10-mm (3/8-inch) stainless steel hex bolts on the bracket to lock the Parapet Arm in position. See Figure 3.13, Page 49, for an illustration. CAUTION! Do not over tighten the bolts. The maximum torque is 34 N-m (25 ft-lb). F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Full Duplex Optical Port Fiber Type, MMF 50/125 µm MMF. For 50/125 µm fiber, subtract 4 dB from the specified optical budget value. Must meet or exceed fiber standard ITU-T G.651. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Connect the audio signal ground to the Audio- (C-) input terminal. The following figure illustrates the connections for audio over an IP network. Figure 4.1 Connections for audio over an Ethernet network F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 53
Cable and Wire Standards | en Audio- (C-) AutoDome Data In/Out Audio+ (C+) P105/P106 Connector Earth Ground Audio Out Signal Ground NOTICE! See Section 7.30 Audio, page 90 for audio configuration. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
AutoDome Programmed N.O. Circuit Alarm Indication Open Normal Closed Alarm 5.2.2 Connecting a Normally Closed Alarm Connect the alarm to the appropriate input (1 or 2) and ground at the AutoDome. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
32 VDC @ 150 ma. Connect the appropriate stripped wire to the open connector (1, 2, or 3) of the transistor. Connect the appropriate stripped wire to the ground (GND) connector. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Microsoft Internet Explorer Web browser version 7.0 or later, or – A computer with Microsoft Windows XP, Vista, or Windows 7 operating system, network access, and reception software such as the Bosch Video Management System or a Bosch recording solution, or –...
You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer. If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch software, the computer must conform to the following minimum requirements: –...
Computer NOTICE! You can also use the Bosch Configuration Manager utility to configure the network settings for an AutoDome 800 Series camera. Go to www.boschsecurity.com to download the Configuration Manager software (part of the BVIP Lite Suite) and Operating Manual.
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address. Using the Configuration Manager Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes. NOTICE! Depending on the PC network security settings, the user may have to add the new IP address to the browser’s trusted sites list for the IP AutoDome controls to operate.
A user manually selects an object in the live image area to track. Intelligent Tracking allows a user to click a moving object in the live image display inside the Livepage to identify an object to track. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
An automatic reconnection procedure is started in the background in order to recover from this error. Gap; no video recorded Watermarking not valid Watermarking flag set on media item Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 62
If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each AutoDome 800 Series can have up to 25 Web browser connections or up to 50 connections via the Bosch Video Management System.
Page 63
Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see the AutoDome online help). Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Click any number combination from 1-99 from the on-screen keypad to identify the scene number. Click the Set Shot button. The image area displays a message that indicates which shot number was saved. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
6.6.3 Using Special Functions The AutoDome offers several special command buttons on the Livepage. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If the AutoDome 800 Series is accessed via the Web browser, you will see the processor load indicator in the top left of the window next to the manufacturer's logo. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 67
Move the cursor over the graphic indicator. Some additional numerical values are also displayed. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
In addition, set markers in the sequences, so-called bookmarks, and jump directly to these. These bookmarks are indicated as small yellow arrows above the time interval. Use the bookmarks as follows: Jump to the previous bookmark F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 69
Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when leaving the page. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Select the protocol that is supported by the selected time server. Preferably, you should select the SNTP server as the protocol. This supports a high level of accuracy and is required for special applications and subsequent function extensions. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome 800 Series. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...
You can record the images from the AutoDome 800 Series on various local storage media or on an appropriately configured iSCSI system. Here you can select a storage medium and immediately start the recording. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If you do not create a table, there will be no automatic switching. When changing and clearing individual entries, remember that two entries are usually related to each other and dependent on one another (switching to summer time and back to normal time). Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)). In the Position (XY) fields, enter the values for the desired position. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Internet/Intranet). When accessing via the Internet/Intranet, ensure that a connection is always available to display the image. The image file is not stored in the AutoDome 800 Series. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
When video content analysis (VCA) is activated, additional information is displayed in the live video stream. For example, in Motion+ mode, the sensor areas for motion detection are marked. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Reverses the image 180º (ideal when mounting upside down). Set the orientation to Normal (default) or Inverted. CAUTION! The AutoDome disables the Privacy Mask function if the orientation is set to Inverted. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Target bit rate: 1500 kbps Maximum bit rate: 3000 kbps Encoding interval: 30.00 ips – SD low bandwidth Target bit rate: 700 kbps Maximum bit rate: 1500 kbps Encoding interval: 30.00 ips F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 81
Here you can select the desired resolution for the video image. The following resolutions are available for standard definition settings only: – QVGA 320×240 pixels – 640 x 480 pixels – 352 × 288/240 pixels – 4CIF/D1 704 × 576/480 pixels Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
For the first H.264 stream you can select from these options: HD stream options: – H.264 MP 720p30 Fixed – H.264 MP 1080p Fixed – H.264 MP 720p60 Fixed F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 83
Select the resolution, frame rate, and image quality parameters for the M-JPEG stream. – Resoltuion: Select either 4CIF/D1 or CIF. – Frame rate: Select one of the following frame rates: 5, 10, 15, 20, 25, or 30 ips. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Manual: Red and Blue gain can be manually set to a desired position. – Outdoor Auto: Automatically adjusts the white balance to reduce the dark tones at dawn or dusk. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 85
Optimizes the video level for the selected area of the image. Parts outside this area may be underexposed or overexposed. Select On to optimize the video level for the central area of the image. The default setting is Off. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If you select this option, the AutoDome makes the following changes automatically: – Gain Control: switches to AGC – Shutter Speed: switches to default – Manual: camera must be manually adjusted to compensate for varying light conditions. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Sets the left Auto Pan limit of the camera. Use the preview window to move the camera to the left pan limit and click the button. The camera will not move past this limit when in Auto Pan Between Limits mode (AUX 2 ON). Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
NE, E, SE, S, SW, W, NW) heading in which the camera is pointing. NOTICE! The compass feature is not compatible with Bosch Intelligent Tracking. If Intelligent Tracking is activated, the camera automatically disables the display of the compass heading. Once Intelligent Tracking is deactivated, the camera returns the compass heading to the display.
The AutoDome 800 Series pan capability is 360° and is divided into 16 equal sectors. This section allows you to apply a title for each sector and to designate any sectors as a Blanked Sector. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
It is also possible to let the VRM Video Recording Manager control all recording when accessing an iSCSI system. This is an external program for configuring recording tasks for video servers. For further information please contact your local customer service at Bosch Security Systems, Inc.
A new window will open and you can select the profiles in which you want to copy the settings. For each profile, click the Set button to save the settings in the unit. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 93
Including metadata could make subsequent searches of recordings easier but it requires additional memory capacity. CAUTION! Without metadata, it is not possible to include video content analysis in recordings. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Click the date you wish to delete. Click OK. The item will be deleted from the table and the window will close. The process must be repeated for deleting additional days. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
In this page, you can save a maximum of ten destination IP addresses and hence up to ten passwords for connecting to remote stations. If connections to more than ten remote stations Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 96
VIDOS or Bosch Video Management System, you can store a general password here. The AutoDome 800 Series can use this general password to connect to all remote stations protected with the same password.
VCA configuration Select one of the profiles here to activate it or edit it. You can rename the profile. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 98
NOTICE! Additional analysis algorithms with comprehensive functions such as IVMD and IVA are available from Bosch Security Systems, inc. If you select one of these algorithms, you can set the corresponding parameters here directly. You can find information on this in the relevant documents on the product CD supplied.
Page 99
This setting is independent of the sensor fields selected under Select Area. Set a high value if fewer sensor fields need to change to trigger an alarm. With a low value, it is Bosch Security Systems, Inc. Installation Manual...
Page 100
You can select the image areas in the reference image that are to be monitored. The video image is subdivided into 858 square fields. Each of these fields can be activated or deactivated individually. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Select On if you want the device to generate audio alarms. Name The name makes it easier to identify the alarm in extensive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs. Enter a unique and clear name here. CAUTION! Do not use any special characters, for example &, in the name.
Test e-mail You can test the e-mail function by clicking the Send Now button. An alarm e-mail is immediately created and sent. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Local Input 2: a physical alarm connection. – IVA/MOTION+: an alarm when IVA or motion detection is activated. – Connection: an alarm when an attempt is made to access the camera’s IP address. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Select one of the following actions that the AutoDome performs after the relay is triggered: – – Connection – Video Alarm 1 – Motion Alarm 1 – Local Input 1 F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
If a DHCP server is employed in the network for the dynamic assignment of IP addresses, you can activate acceptance of IP addresses automatically assigned to the AutoDome 800 Series. Certain applications (VIDOS, Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the unit. If you use these...
HTTP browser port, RCP+ port 1756 and Telnet support. This deactivates all unsecured connections. Connections will then only be possible via the HTTPS port. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 107
To transfer the IP address of the AutoDome 800 Series, click the Register button. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP addresses and the Internet Group Management Protocol (IGMP V2). The address range is from 225.0.0.0 to 239.255.255.255. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are always correctly set. Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
In this way, an AutoDome 800 Series can be serviced and updated remotely without a technician having to change the installation on site. Refer to Section 9 BVIP Firmware Updates, page 115, for firmware upgrade instructions. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 112
Even changing to another page or closing the browser window leads to an interruption. Refer to Section 9 BVIP Firmware Updates, page 115, for firmware upgrade instructions. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
You can select all required text on this page with the mouse and copy it to the clipboard with the [Ctrl]+[C] key combination, for example if you want to send it via e-mail. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
To replace the bubble, insert the bubble assembly into the pendant housing, and rotate it clockwise (looking up at the dome) until it locks. The latch mechanism makes a click when it locks. Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Do Not scrape the bubble with razor blades or other sharp instruments. – Do Not use Benzene, Gasoline, Acetone, or Carbon Tetrachloride on the bubble. – Do Not clean bubbles in the hot sun or on very hot days. F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
The AutoDome 800 Series also allows an operator to update the BVIP firmware via the TCP/IP network. The latest BVIP firmware is available on the Bosch Security Systems Web site. To download the service pack from the Web, navigate to www.boschsecurity.us, click the CCTV link, then click Cameras, PTZ and navigate to the product page for the AutoDome 800 Series.
On–Displays compass heading Heading Off–Hides compass heading On/Off Record Tour A On– start recording Off – stop recording On/Off Record Tour B On– start recording Off – stop recording F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 118
63 command numbers 64 false alarms 98 fiber optic module 25 single mode 51 with pendant arm, corner or mast mount 18 with roof parapet or pipe mount 39 Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 119
TCP port 109 IP address 105 TCP/IP 56 IPv4 105 UDP 56 IPv6 106 UPnP 109 iSCSI settings 91 non-supervised alarms 54 NTCIP 108 JPEG 56 number of connections 62 F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
Page 120
92 recorded 88 recording scheduler 94 transmission protocol 96 recording status 95 traps 108 recording video sequences 66 trim skirt 16 reflections of light 98 TTL 110 relay 55 Bosch Security Systems, Inc. Installation Manual F.01U.273.797 | 5.0 | 2012.08...
Page 121
77 wire standards 51 wiring for pendant arm, corner or mast mount 15 for pipe interface board 46 for roof parapet or pipe mount 39 power supply box 37 F.01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.