Table of Contents
Advertisement
VOT-320
Remote control
For remote control of external units such as pan/tilts, control data is transmitted via the
VOT-320's bidirectional serial interface, or directly via the control outputs. The serial interface
can also be used to transmit transparent data.
Tamper detection and video content analysis
The VOT-320 offers a wide range of configuration options for alarm signaling in the event of
tampering with the camera. Two algorithms for detecting movement in the video image,
MOTION+ and IVA are integrated offering extended video content analysis.
Snapshots
Individual video frames (snapshots) from the VOT-320 can be called up as JPEG images,
stored on the computer's hard drive or displayed in a separate browser window.
Recordings
The camera provides local SD card storage for shorter storage times and temporary
recordings. Attached to the network, the camera can use iSCSI targets to store long-term
recordings. The iSCSI storage target support enables the camera to function as a conventional
DVR, while streaming high-performance live video across the network.
Backup
A function for storing the video images displayed on the hard drive of your computer is
available on the LIVEPAGE. Video sequences can be stored by means of a mouse click.
ONVIF (Open Network Video Interface Forum)
The camera complies to the ONVIF standard which means that it is easier to install and
integrate into larger systems. The ONVIF standard is a global standard for the interface of
network video products.
Bosch Sicherheitssysteme GmbH
Installation and Operating Manual
Product description | en
13
DOC | V4.5 | 2010.09
Advertisement
Table of Contents
