Table of Contents
Advertisement
VOT-320
Controlling a playback
You will see a time bar below the video image for quick orientation. A green arrow above the
bar indicates the position of the image currently being played back within the sequence.
The time bar offers various options for navigation.
Red bars indicate the points in time where alarms were triggered. Drag the green arrow to
navigate to these points quickly.
1.
2.
Buttons
You can control playback by means of the buttons below the video image. The buttons have
the following functions:
Slide controls
Use the slide control below the Start button to control playback speed. The default value of
100% represents real time speed. Higher values speed up the playback, lower values slow it
down.
Use the slide control below the time bar to control playback direction. Drag the rectangle to
the right for fast forwarding the playback. Drag it to the left for rewinding.
Bosch Sicherheitssysteme GmbH
You can change the time interval by clicking the zoom keys (magnifying glass icons). The
display can span a range from two months to a few seconds.
Drag the green arrow to the point in time at which playback should begin. The date and
time display below the bar provides orientation to the second.
Start or pause playback
Leap to the start of the active video sequence or to the previous sequence
Leap to the start of the next video sequence
Installation and Operating Manual
Operation | en
89
DOC | V4.5 | 2010.09
Advertisement
Table of Contents
