Table of Contents
Advertisement
86
en | Operation
Digital I/O
The alarm icons Input 1 and Input 2 are for information purposes and indicate the status of an
alarm input: When an alarm is triggered, the corresponding icon lights up blue. The camera's
configuration determines whether the alarm is displayed, as well as additional details (see
Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).
Triggering relay
You can switch connected units using the relays in the VOT-320 (for example lights or door
openers).
System Log / Event Log
The System Log field contains information about the operating status of the VOT-320 and the
connection. You can save these messages automatically in a file (see Section 5.14 Advanced
Mode: LIVEPAGE Functions, page 38).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file (see Section 5.14 Advanced Mode: LIVEPAGE Functions,
page 38).
1.
2.
DOC | V4.5 | 2010.09
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
Installation and Operating Manual
VOT-320
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
