Table of Contents
Advertisement
VOT-320
5.6
Basic Mode: Encoder
Non-recording profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field. Below is a brief description of the
factory default settings for the encoder profiles.
NOTICE!
The names and the technical details for the encoder profiles depend on the configuration of
the device.
–
–
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
High quality 1
For high bandwidth connections with IBBP GOP structure
High quality 2
For high bandwidth connections with IP GOP structure
Low bandwidth
For low bandwidth connections with lP GOP structure
DSL
For DSL connections with 500 kbps
ISDN (2B)
For ISDN connections via two B-channels
ISDN (1B)
For ISDN connections via one B-channel
MODEM
For analog modem connections with 20 kbps
GSM
For GSM connections at 9,600 baud
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V4.5 | 2010.09
31
Advertisement
Table of Contents
