Table of Contents
Advertisement
44
en | Configuration using a Web browser
3.
Property
Select the required encoder properties for the relevant data stream here.
Non-recording profile
Select the required encoder profile here. The properties of the profiles are defined on the
Encoder Profile page (see Section 5.17 Advanced Mode: Encoder Profile, page 40).
JPEG stream
You can set up the separate JPEG stream in this area. These settings are independent of the
H.264 settings. The resolution corresponds to the highest setting from the two data streams.
Max. frame rate
You can select the maximum frame rate for transmitting the JPEG images.
Picture quality
This setting allows you to define the picture quality. Low quality requires a lower bandwidth
in the network.
DOC | V4.5 | 2010.09
Click the 1:1 Live View button below the preview screen to open a new window with the
original data stream and to check the image quality and the transmission rate.
Installation and Operating Manual
VOT-320
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
