Table of Contents
Advertisement
Loading Paper in the Printer
See the sequence of figures on page IX.
1. Holding the tab on the left edge of the guide on the ASF,
move it to its extreme left position (physical left hand
margin).
2. Fan the paper thoroughly.
3. Align the paper against the physical right hand margin
and load it into the ASF, pushing it down carefully until it
stops inside the printer.
The ASF can contain up to 120 x 21 lbs single sheets of
plain paper. For other types of documents and
envelopes, see "Paper" in the User Guide.
Do NOT add paper to that already in the ASF; always
remove any existing paper and fan it together with the
paper to be loaded.
4. Position the left guide against the left edge of the paper.
5. With the printer powered, press the PAPER key. A
sheet of paper is inserted to the first print position (TOF -
Top of Form). Press PAPER again, to make sure that
the paper feeds smoothly without crushing or skewing.
The paper will exit on to the output tray spoilers and will
drop into the tray when PAPER is pressed again to
load another sheet.
For further information on paper types, sizes, etc., see
"Paper" in the User Guide.
4
Inserting the Print Heads
See the sequence of figures on page IV and the instruc-
tions on the inside of the cover (template on page XI).
The print head carriage on your printer is designed to hold
two print heads: monochrome black, on the left; color, on
the right. BOTH print heads MUST be inserted BEFORE
attempting any printing operation. To insert the print heads,
proceed as follows:
1. Make sure the printer is powered (if it is not, press the
POWER key on the operator panel).
2. Open the sealed print head container of the
monochrome print head and remove the instructions
leaflet (which should be kept for future reference).
3. Remove the print head from the container, holding it by
the thumb and finger grip (end opposite the protective
film).
4. Remove the protective film from the print head ( point 2
in figure 1 on page VIII ).
Do not touch either the electrical contacts
(golden area - point 1 of figure 1 on page VIII) or
the printing nozzles (end opposite the finger/
thumb grip - point 3 of figure 1 on page VIII) nor
sit the print head on either of them.
5. Open the printer cover; the print head carriage will move
automatically to the head loading position for the
monochrome print head (left hand chamber) and the
light indicators will start flashing alternately.
Quick Start
Advertisement
Table of Contents
