NEC SuperScript 750C User Manual page 28

G
Information file (README.TXT)
Whenever necessary, latest information on the printer
driver, or instructions updating this manual are included in
an information file contained in the diskette(s). If present,
the file will automatically be copied into the driver group that
will be created during driver installation.
If you want to check this file directly from the diskette, you
will find it in each language directory:
under Windows® 3.1/3.11, open it through the "Write"
application.
under Windows® 95, open it through the "Wordpad"
application, specifying the correct file extension (*.TXT)
G
System requirements
From Windows® 3.1 up to Windows® 95,
PC 386 or later with at least 4 MBytes of RAM (8 Mbytes
recommended for Windows® 95),
1 MByte of free disk space.
6
Printer Driver Installation Procedure
The installation procedure will vary, depending on the
Windows® environment installed on your PC.
G
Windows® 3.1/3.11
1. Start Microsoft Windows®.
(If it is already running, make sure that all Windows
application tasks are closed before starting to install the
driver.)
2. Insert the driver diskette in drive A (or B) of your PC.
3. From the File menu of the Program Manager, select the
option "Run...".
4. Type A:\SETUP.EXE (or B:) and press ENTER.
The installation process starts.
5. Follow the instructions given in the sequence of windows
displayed on your PC screen, until the driver is installed.
6. A group window with the driver name will be created
automatically. It allows immediate access to the Spool
Manager, the Printer Monitor, the Help and information
files whenever these are required.
You can also install the printer driver through the "Add
Printer" feature in the Control Panel in Program
Manager/Main, proceeding as follows:
1. Insert the diskette in drive A (usually) of your PC.
2. Activate Microsoft Windows® environment (If it is
already running, make sure that all Windows application
tasks are closed before starting to install the driver.)
Quick Start