Meter Power - Fluke 975 AirMeter User Manual

Meter Power

XWWarning
To avoid electrical shock or personal injury,
always match the line cord to the instrument.
Use the line cord supplied for this
instrument with this instrument only.
Do not use this line cord with any other
instruments.
Do not use any other line cords with this
instrument.
Use the proper line cord and adapter for
your country.
Do not replace the Lithium battery. For
Lithium battery replacement, the Meter
must be sent to Fluke. See "Contacting
Fluke".
The Meter is powered by a rechargeable lithium battery, a
supplied ac adapter, or three AA batteries used as a
backup power supply. See Figure 3 to locate the ac
power input.
Before the rechargeable battery can be used, it
must first be charged for several hours. If
immediate Meter use is necessary, the backup
batteries or the line cord can be used.
Note
/
This Meter contains a lithium battery.
Do not mix with the solid waste stream. Spent
batteries should be disposed of by a qualified
recycler or hazardous materials handler.
Contact your authorized Fluke Service Center for
recycling information.
A fully-charged Meter operates for 11 hours. The backup
power supply lasts 7 hours.
See "Maintenance" for information on how to charge the
Lithium battery and how to change the AA batteries.
The adapter/charger includes adapters that fit
receptacles in most countries.
TM
AirMeter Test Tool
Using the Meter
Note
Note
7