Logging Button Lockout - Fluke 975 AirMeter User Manual

5. Once the desired parameters have been entered, the
display shows the selected duration time, sampling
interval, and the available memory %.
6. The Meter requests user confirmation before starting
a logging session:
Press 1[Yes] to confirm the settings and
begin logging.
Press 2[Adjust] to change logging
parameters.
Press 3[Cancel] to return to exit the logging
mode.
The Meter logs the sessions until stopped or the logging
interval has expired. To stop logging, press 2[Stop].
All other keys are inoperative while logging.
Notes
When continuously logging data, the logs are
stored using the selected measurement units
(Metric or US). To change units, logging must be
stopped and a new log created.
If the Meter memory is full, the memory must be
cleared or the parameters of the measurement
must be changed to accommodate the new
readings. Follow the on-screen prompts to make
adjustments.
The Meter cannot be turned off while in
logging mode. Logging must be completed
or 2[Stop] must be pressed to cancel
logging prior to turning the Meter off.

Logging Button Lockout

The Meter has an automatic and manual button lockout
feature to prevent accidental button pushes during a
continuous logging session.
During logging, the automatic button lockout is engaged
and only 2 [STOP] is active which will end logging.
To manually lock the entire keypad, press
T
and simultaneously for 3 seconds. All buttons will be
inoperative until the button sequence is repeated.
TM
AirMeter Test Tool
Data Logging
M, S,
17