Startup And Self Test - Fluke 975 AirMeter User Manual
Test tool
Hide thumbs
Also See for 975 AirMeter:
- Application note (3 pages) ,
- Datasheet (1 page) ,
- Application note (3 pages)
Table of Contents
Advertisement
975
Users Manual
USB Port
Figure 3. AC Adapter Input and USB Port
8
AC Adapter
Input
eba02f.eps
Startup and Self Test
To turn the Meter on, press and hold
seconds and wait for the flashing red LED on the left side
P
of the display. Press
for 2 seconds to turn the Meter
OFF. Once powered up, the following information is
displayed:
Battery charge indicators
Model number of the Meter (975)
Firmware version number
Current date
Last calibration date
Calibration due date
Absolute barometric pressure
Self-test countdown
At power up, the Meter performs a 35-second self-
diagnostic test for each of its functions. When it passes
the self-test, the Meter is ready for use. Refer to Table 4
for a list of self-diagnostic test failures.
If portions of the self-test fail, some functions of
the Meter may still be used but this is not
recommended. Have the Meter serviced
immediately. Refer to "Contacting Fluke" for
service details.
P
for a few
Note
Hide quick links:
Advertisement
Table of Contents
