Recalling Or Erasing Logged Data - Fluke 975 AirMeter User Manual

975
Users Manual

Recalling or Erasing Logged Data

Use the Recall function to retrieve or erase the single
point or continuous logging session records.
To view single points of data:
R
1. Press to show the Recall menu.
Press 3[Single Point]. Detailed sessions appear
2.
on the display starting with the most recent sample.
Press 1[Next] or 2[Previous] to move the
3.
cursor to the previous or next detailed sample.
If the velocity probe is attached, press 3 to
4.
access the velocity section of the sample.
To view logged sessions:
R
1. Press to show the Recall menu.
Press 1[Logged Sessions]. Logged sessions
2.
appear on the display starting with the most recent
session.
Press 1[Next] or 2[Previous]to move the
3.
cursor to the previous or next detailed session.
Listed session parameters are:
Session number
Temperature
Relative Humidity
Wet Bulb
Dew point
CO
18
CO
2
Sample ID/total number of samples
Time/Date stamp
Velocity (push 3 for access)
Press 1[Next Sample] or 2[Previous Sample] to
4.
move to the next or previous session.
To escape recall mode, press Q, T, or V.
To erase single points or logged sessions:
R
1. Press to show the Recall menu.
Press 2[Erase Memory].
2.
Press 1[Item] to choose either Single Data
3.
Points or Continuous Logged Sessions.
Press 2[Erase Memory].
4.
Press 1[YES] to confirm that the memory is to be
5.
erased or 3[Cancel] to abort erasing any data.