Table of Contents
Advertisement
Versiv Cabling Certification Product Family
Users Manual
A
Versiv main unit with CertiFiber
Pro module installed
One test reference cord
Fiber cleaning supplies
Figure 79. Equipment for Power Meter Measurements
To monitor power
Clean and inspect the tester's input port and the connectors
1
on the source and test reference cord.
Connect the tester to the source, as shown in Figure 80.
2
Turn on the source. On a CertiFiber Pro module, hold down
3
the button adjacent to the VFL port for 3 seconds.
On the home screen, tap TOOLS, then tap Power Meter /
4
Light Source.
The default mode for the power meter is Auto CertiFiber Pro.
5
If the source is not a CertiFiber Pro tester, tap to select the
correct mode.
Figure 81 shows the power meter and its controls.
194
B
D
C
FI-1000 video probe with USB
connector
AC adapter with line cords
(optional)
E
GPU137EPS
Advertisement
Table of Contents
