Using The Meter; Softkeys And Pushbuttons - Fluke 975 AirMeter User Manual

975
Users Manual

Using the Meter

The following sections explain how to use the Meter and
its features.

Softkeys and Pushbuttons

Use the softkeys to navigate among different menus or to
select different functions. Softkeys 1, 2, and 3
correspond to prompts in the lower section of the display.
Refer to Figure 2 and Table 3. Use the pushbuttons to
select different Meter functions.
F1
%
CO CO
OUTSIDE
TEMP %RH
AIR
Figure 2. Softkeys and Pushbuttons
6
F2 F3
2
eba01.eps
Table 3. Softkeys and Pushbuttons
Softkey or
Pushbutton
Softkeys- Each softkey corresponds to
prompts on the lower section of the
123
display. The prompts change depending
on what function menu is used.
CO and CO
T
Humidity- Activates the Temperature,
Relative Humidity, CO and CO
Bulb, and Dew Point functions.
Q
% Outside Air- Activates the % Outside
Air menu. See "% Outside Air".
Velocity-When used with the optional
Velocity Probe, this activates the Air
V
Velocity and Volume Flow Rate menus.
See "Air Velocity and Volume Flow
Rate".
Log/Save- Activates the Log/Save
L
menus. See "Data Logging".
Recall- Press this button to access the
R
Logged Data menu. See "Recalling or
Erasing Logged Data".
MIN MAX- Activates the Min Max Avg
M
function. See "Min Max Avg".
P
Power- Turns the Meter on and off.
Setup- Press to enter the Setup menu.
S
See "The Setup Menu".
Function
Temperature/ % Relative
2
, Wet
2