Power Meter - Fluke OMNIScanner 2 User Manual

the screen point out the direction of the light and indicate which fiber
the result is for.
Press ESC to exit the LOSS screen.

Power Meter

The Power Meter function reports the overall received power. Use it
to quickly verify and correct cabling and equipment problems.
The POWER METER screen shows the currently
selected wavelength and light source mode.
The overall power is displayed.
OMNIF main is designed to provide a consis-
IBER
tent, calibrated light source for effectively
measuring signal loss in fiber optic cables. The
transmitted light can be operated continuously
or modulated.
When testing loss, use the continuous light source, when identifying
fiber cables with a tone locator, use the 2KHz modulated mode.
Press (Continuous) or
source.
When using OMNIF
change the wavelength of the OMNIF
wavelengths.
When using OMNIF
change the wavelength of the OMNIF
wavelengths.
Either Main or Remote can be used as the light source with the main
power meter.
When OMNIF
IBER
used as light source. With the OMNIF
key to activate the light source and provide continuous or modulated
light at 850 or 1300 nm for multimode fiber, or at 1310 or 1550 for
single-mode fiber. The green LED of the appropriate wavelength will
blink rapidly when modulated light is transmitted. If the transmitted
MM (multimode), press
IBER
SM (single-mode), press
IBER
is attached to OMNIR
OMNIS
(Modulated) to change the light
Main transmitted and received
IBER
Main transmitted and received
IBER
, the remote unit can be
EMOTE
adapter attached, press the λ λ λ λ λ
IBER
User Guide
CANNER
or to
or to
5 - 15