Gateway ALR 7300 Maintaining And Troubleshooting page 52

42 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Figure 24: Removing a 5.25-inch Drive
Remove the screws that secure the drive rails to the drive and remove
7.
the rails.
Mount the guide rails to the new drive using the screws you removed
8.
from the old drive.
Align the guide rails with the rail guides in the drive bay and slide the
9.
drive all of the way into the bay. The tabs on the rails will click into
place when the drive is fully inserted (see Figure 25).
Guide rail Tab