Gateway ALR 7300 Maintaining And Troubleshooting page 39

Figure 13: Installing the Replacement Processor
If the processor cartridge does not already have the heatsink attached
8.
to it, attach the heatsink according to the instructions that came with
the processor upgrade kit.
Replace the lock bar on the processor support and secure it with the
9.
two screws that you removed in Step 3.
Set the jumpers for the new processor configuration (see the section
10.
"Setting the jumpers" on page 33).
Close the case, as described in "Closing the system" on page 8.
11.
Reconnect the power cord and turn on the system.
12.
Installing Components 29