Gateway ALR 7300 Maintaining And Troubleshooting page 42

32 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Figure 15: Installing the Second Processor
Place the lock bar on top of the supports and secure it by inserting and
6.
tightening the two screws you removed in Step 3.
Set the jumpers for the new processor configuration (see the section
7.
"Setting the jumpers" on page 33).
Insert the VRM into the connector provided until the release clips
8.
click into place.
Close the case, as described in "Closing the system" on page 8.
9.
Reconnect the power cord and turn on the system.
10.