Typical Layouts - Pts/U Series - Space-Ray Infrared Radiant Tube Heater PTS Series Installation And Operation Instructions Manual

7.0) TYPICAL LAYOUTS – PTU / PTS Series
MODEL
PTS 40
PTS 50
PTS 75
PTS 100
PTS 125
PTS 150
PTS 175
PTS 200
NOTES:
1) In all configurations, the control unit must be connected directly to either a) the 24-hole flange of the 10 ft.
aluminized steel starting body section (for 10 ft., 20 ft., and 30 ft. systems) or b) the 6-hole flange of the 10 ft.
alumi-therm steel starting body section (for 40 ft., 50 ft., 60 ft., and 70 ft. systems.
2) Joining of two 90º elbows directly together to form a "Z" shape IS NOT permitted.
3) PTS / U 175 - 40 ft length available for special applications.
4) 5 Ft. Body Packages may be utilized on any of these heaters to yield heater lengths from 15 ft. to 70 ft.
5) Any configuration of components not shown in the illustrations may be used except as noted in 1 and 2
Form #43343330
May 08
EMITTER LENGTH
Min. Max.
10 Ft. 20 Ft.
20 Ft 30 Ft.
20 Ft. 30 Ft.
30 Ft. 40 Ft.
30 Ft 50 Ft.
40 Ft. 60 Ft.
50 Ft. 70 Ft.
50 Ft. 70 Ft.
MODEL
PTU 40
PTU 50
PTU 75
PTU 100
PTU 125
PTU 150
PTU 175
PTU 200
–11–
BODY LENGTH
Min. Max.
10 Ft. 10 Ft.
10 Ft. 15 Ft.
10 Ft. 15 Ft
15 Ft. 20 Ft.
15 Ft. 25 Ft.
20 Ft. 30 Ft.
25 Ft. 35 Ft.
25 Ft. 35 Ft.