Ltu Series Typical Layouts; Ltu Series Dimensions - Space-Ray LTU 80– N5 Installation And Operation Instructions Manual

8.0)

LTU SERIES TYPICAL LAYOUTS

LEGEND
NOTES: NOTES:
NOTES: NOTES:
1. In all configurations, the control unit must be connected directly to either a) the 12-radial hole flange of the
aluminized steel body section (for LTU 80-200 models) or b) the 6-hole flange of the 10 ft. alumi-therm steel
body section (for LTU 225 and 250 models).
2. Failure to attach the control box to the 6 Failure to attach the control box to the 6- - - - hole flange for
Failure to attach the control box to the 6 Failure to attach the control box to the 6
manufacturer's warranty. manufacturer's warranty.
manufacturer's warranty. manufacturer's warranty.
8.1)

LTU SERIES DIMENSIONS

EMITTER EMITTER EMITTER EMITTER
LENGTH LENGTH LENGTH LENGTH
30'
40'
50'
hole flange for LTU LTU 225 225- - - - 250 as indicated above will void the
hole flange for hole flange for LTU LTU 225 225
Models: Models: LTU Models: Models: LTU LTU LTU 80 80 80- - - - 130 80 130 130 130
-8-
MODEL MODEL MODEL MODEL
LTU 80, 90, 100, 110, 120, 125, 130
LTU 125, 130, 140, 150, 160, 175
LTU 180, 200, 225, 250
250 as indicated above will void the
250 as indicated above will void the 250 as indicated above will void the
Form #43155010
May 2013