Applications - GarrettCom Magnum ST80 Stackable Installation And User Manual

Stackable Personal Hubs
2.4

Applications

Expanding from one to multiple ports at an existing site is easy, and requires
no modification to typical building wiring. Simply plug the existing networked device's
network cable into one of the ST80's front RJ-45 ports. The Up-Link port (with switch
set to "X") connects via 10BASE-T cabling to the existing network outlet. Optionally, a
mini-transceiver may be connected to the rear-mounted AUI port to provide connectivity
to any standard Ethernet media type. (The ST80-B and ST80-F provide for direct
connection to 10BASE2 and multi-mode Fiber respectively).
Personal Workgroup
Power is connected by plugging the external power supply unit into an AC
power receptacle, and plugging the DC power plug into the jack on the back of the ST80.
In minutes, up to eight additional ports are available for other networked devices.
Personal Workgroup
www GarrettCom com .
Port 8 Switchable
Up-Link set to "X"
PWR AUI
Magnum ST80 Stackable Personal Hub
UP-LINK
Ports 1 2 3 4 5 6 7 8
...to existing network via AUI,
BNC (ST80-B only), or Fiber ST
(ST80-F only) connector.
PWR
Magnum ST80 Stackable Personal Hub
UP-LINK
Ports 1 2 3 4 5 6 7 8
.
Installation and User Guide (04/01)
...to existing network via
switchable Up-Link port.
AUI
Port 8 Switchable
Up-Link set to "=="
9