Table of Contents
Advertisement
Magnum ITS Blade Hardened Switches for 2070's
ITS Blades are designed and advised to use only with 2070 Chassis
The ITS Blade hardened switch is designed to use with 2070 backplane pins
ABC29 per TEES 03/02 and draw the power from the chassis itself.
MTBF over 25 years, per Bellcore calculation method
sales@garrettcom.com
Email
2.6
Applications
The ITS Blade is designed specifically for harsh temperature environments and brings
future-proof fiber and widely used copper connectivity to out-of-the-way sites and outdoors.
Example 1. Magnum ITS Blade
serves real time roadside traffic data collection and transmits it to a remote control station over
fiber. Since multiple traffic control sites here are a long distance apart, they are all connected in
series to each other and to the central station or TOC.
Some local users (using RJ-45 ports) may operate at 100Mbps, and some users and
utility devices may run at 10 Mbps. A Magnum ITS Blade Hardened Switch serves this
requirement economically and efficiently. The six full- and half-duplex switched ports make the
required setup simple for collection of traffic data, including streaming video from one or more
cameras. The advanced thermal techniques enable operation in un-controlled outdoor
temperatures, and provide high reliability of the ITS Blade, make it suited to the roadside site.
The two 100Mbps full-duplex fiber ports fulfill the long distance connection need, and provide
Figure 2.6: A ITS Blade connects combinations of 10 Mbps
and100Mbps network devices, providing a 100Mb Ethernet fiber
for access to the central control station (TOC)
www GarrettCom com
.
.
Installation and User Guide (02/03)
for MTBF details
In this example, a Magnum ITS Blade Hardened Switch
10
backbone
Advertisement
Table of Contents
