Related Manuals for GarrettCom PS14H-48VDC
Summary of Contents for GarrettCom PS14H-48VDC
- Page 1 Magnum S14 Convenient Switch & PS14P Power Source Switch (PoE) User Guide Installation and www GarrettCom com $5.00 USD...
- Page 2 Installation and User Guide Part #: 84-00100Z Rev. D Trademarks GarrettCom is a registered trademark and Magnum, Dymec, DynaStar, Personal Switch, Link-Loss-Learn, S-Ring, Convenient Switch and Converter Switch are trademarks of GarrettCom, Inc. Ethernet is a trademark of Xerox Corporation...
- Page 3 Magnum S14 & PS14P 10/100 Mb/s Convenient Switches, consult Section 5, Troubleshooting, of this User Guide. Copyright © 2005 GarrettCom, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from GarrettCom, Inc.
- Page 4 Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. www GarrettCom com...
- Page 5 Class 2, or listed ITE Power Supply, marked LPS, which has suitably rated output voltage (i.e. 24VDC or 48VDC) and suitable rated output current. Product does not contain user replaceable fuses. Any internal fuses can ONLY be replaced by GarrettCom personnel through the RMA process. www GarrettCom com...
- Page 6 S14 & PS14P (PoE) Convenient Switches Installation and User Guide Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.GarrettCom.com...
-
Page 7: Table Of Contents
................. 41 Locating the Convenient Switch Unit ..........41 MC14-TRAY for Rack Mounting of S14-Series Switches....43 MC14-TR+PS9 & MC14-TR+PS9X2 for Rack Mounting ....44 DIN-Rail mounting option ..............46 www GarrettCom com... - Page 8 Dual-Speed Functionality, and Switching ......... 57 Auto-cross (MDIX), Auto-negotiation and Speed-sensing ....59 Dual LEDs, Front-panel and side-panel ..........61 TROUBLESHOOTING ..............62 Before Calling for Assistance ............63 www GarrettCom com...
- Page 9 10/04: Small edit and updates on power supply option. 09/04: Small edit and updates on UL. 06/04: Small revision of the Agency Approvals Rev A 03/04: Initial release of this user manual for the S14 Converter Switch www GarrettCom com viii...
-
Page 10: Specifications
10 Mb: Ethernet IEEE 802.3, 10BASE-T Power Over Ethernet: IEEE 802.3af (PS14P model only) Auto-sensing for speed: IEEE 802.3u Data packets that have the 4-bytes tagged VLAN field (802.1q) inserted in them are received and transmitted unchanged. www GarrettCom com... - Page 11 5μs 10 to 100Mbps: 5μs Path Delay Value: 50 BT on all ports Maximum Ethernet Segment (or Domain) Lengths 10BASE-T (Unshielded twisted pair) - 100 m (328 ft) 100BASE-TX (CAT 5 UTP) - 100 m (328 ft) www GarrettCom com...
- Page 12 -40ºF to 185ºF (-40ºC to 85ºC) Cold Start: (S14H) model to -20ºC (S14P) model to -40ºC Ambient Relative Humidity: 5% to 95% (non-condensing) Altitude (All models): -200 to 5000ft. (-60 – 15,000 m) Conformal Coating (optional) Humidity protection www GarrettCom com...
- Page 13 –Hd, and Hi: 5.8 oz (165g) –Pd, and =Pi: 7.9 oz (225g) PS14P units: 9.6 oz (272g) Cooling Method: Convection on regular model, plus the case is used as a heat sink on “H” and “P” models. www GarrettCom com...
- Page 14 Hi” models that have IEC320 power connector built-in the PS unit. Out put- 12vdc, 1.25 Amps Input: 100-240V AC at 47-63Hz, for “-Pd” high temp. 100-240V AC at 47-63Hz, “-Pi” models that have IEC320 power connector built-in the PS unit. Out put- 12vdc, 2 Amps www GarrettCom com...
- Page 15 -48V DC internal (range of 36 to 60V DC) t. Power Consumption: 3 watts typical, 4 watts max. Note 1: 8-15V DC can be used for dual source DC input Note 2: Internal DC power floats, user may ground “+” or “-” if desired. www GarrettCom com...
- Page 16 RJ-45 Port: Auto-cross(MDIX), 100BASE-TX and 10BASE-T:shielded 8-pin female. Three RJ-45 ports provided in front, and one on the rear. Supports shielded (STP) and unshielded (UTP) Cat 3, 4, 5 cable. For PoE pass-through option on P models, use Model # PS14P. www GarrettCom com...
- Page 17 Mounting option for S14 Family of Switches: Metal Mounting clips for panel mounting : included DIN-Rail mounting option: Model # DIN-RAIL MC2 (see Section 3.4) Rack-mount option: MC14-TRAY, see http://www.garrettcom.com/mc_tray.htm Mean Tine Between Failure (MTBF ) – 15+ years, Telcordia (Bellcore SR-332) Method www GarrettCom com...
- Page 18 P model: NEMA TS-2 and TEES for traffic control equipment P model: designed for UL 2043 above-the-ceiling installation IEC61850 EMC and Operating Conditions Class C for Power Substations Designed for above-the-ceiling (plenum) installation Warranty: Three years, return to factory Made in USA www GarrettCom com...
-
Page 19: Summary Of Models And Descriptions
S14PR-24VDC = Same as S14P-24VDC model, but includes DIN-RAIL-MC2 option. S14P-48VDC = Same as S14P-24VDC model, except for -48VDC input MC14-TRAY = 19” Rack-mount tray for 14-series Switch models, up to 16 units DIN-RAIL-MC2 = Metal DIN-Rail mounting bracket for one S14-Series www GarrettCom com... - Page 20 50 watts to support one PS14P-48VDC Switch and up to 4 attached PoE devices, Try this URL – http://www.lanstore.com/ps.htm MC14-TRAY = 19” Rack-mount tray for 14-series Switch models DIN-RAIL-MC2 = Metal DIN-Rail mounting bracket for one PS14P Switch www GarrettCom com...
-
Page 21: Introduction
This package should contain: Magnum S14-Series or PS14P Switch Unit External Power Supply, (for S14, S14H, S14P), (d, i model only) 1 set Metal panel mounting clips and screws, 2 each User Guide, i.e., this manual (continued next page) www GarrettCom com... -
Page 22: Product Description
/ value unit for each user and installation. For any user who needs a small chunk of Ethernet connectivity, a 4-port “go anywhere” Magnum S14 Switch is a versatile and handy solution, and can provide it in a convenient compact package. www GarrettCom com... - Page 23 Convenient Switch Fig2.2a. Magnum S14, Front view (three RJ-45 ports on Front side of the unit, as shown in Fig Fig2.2b. Magnum S14, Rear view (one RJ-45 port on rear side) GarrettCom Magnum S14 Convenient Switch Fig 2.2a www GarrettCom com...
- Page 24 S14H resists dust, dirt, moisture, smoke and insects, and is above-the-ceiling (plenum) rated. Choices of models for external AC or internal DC power are available. Ambient temperature rating is up to –25°C to +60°C for any of the power input types, AC or DC. www GarrettCom com...
- Page 25 Left Side View Fig 2.2c- Magnum S14H, Front view (three RJ-45 ports on Front side of the unit, as shown in Fig. GarrettCom Magnum S14H Hardened Convenient Switch Fig2.2d. Magnum S14H, Rear view (one RJ-45 port and DC option on Fig 2.2c...
- Page 26 DIN-rail, or rack-mount tray. Choices of models for external AC or internal DC powers are available. Ambient temperature rating is –40°C to +75°C for any of the GarrettCom Magnum S14P power input types, AC or DC. Premium Rated Convenient Switch www GarrettCom com...
-
Page 27: Magnum Ps14P : 4-Port Poe Power Source Switch
2.2.1 Magnum PS14P : 4-port PoE Power Source Switch GarrettCom’s continuous efforts of designing reliable and premium-rated Industrial Ethernet products with the latest technology while being a cost effective solution has successfully yielded their first Industrial PoE switch called the Magnum PS14P Convenient Switch. - Page 28 802.3af, PoE end devices. PoE is managed by a multi-stage handshake to protect equipment from damage and to manage power budgets .The PS14P ports will discontinue supplying power when the PoE powered devices are disconnected, and support the www GarrettCom com...
- Page 29 AC- powered devices. The simplicity of PoE increases reliability and reduces the overall cost of installation and operation. These are applications where the Magnum PS14P can be used to provide the www GarrettCom com...
- Page 30 (Temperature, Smoke, Heat and other environmental sensors). - Fire alarms - Security devices, like retinal scanners or fingerprint readers. - Lighting control. - Home automation systems Because of the approval of 802.3af PoE standard, the RJ-45 Ethernet jack will become the www GarrettCom com...
- Page 31 ES42 Edge Switch (six ports with Fiber option) to meet the Fiber requirement. All PS14P Power Source Convenient Switch models come with two (2) sets of LED indicators. One set is mounted in the end adjacent to three of the RJ-4 ports for easy viewing when the www GarrettCom com...
- Page 32 The 8-15vdc option is also present, but can only be used to power the PS14P unit when no PoE devices are attached. While using a 12vdc Adaptor to power on the switch, the unit will not function as a PoE power source switch but as a non-PoE switch only. www GarrettCom com...
-
Page 33: Magnum Ps14P & S14-Series, With Four (Rj-45) Copper Ports
Activity (LK/ACT) LEDs indicating traffic that are mounted on the top of the unit as well as the end. LEDs mounted next to each port indicate (LK/ACT as LA1, LA2, LA3, LA4), 10/100 (ON for 100Mbps), and full/half duplex (F/H is ON for full duplex). www GarrettCom com... -
Page 34: Frame Buffering And Latency
Ethernet segments connected. This "cut-through" technique permits collision fragment frames, which are a result of late collisions, to be forwarded which add to the network traffic. www GarrettCom com... - Page 35 Then, normal packet buffering and processing resumes. This flow-control sequence occurs in a small fraction of a second and is transparent to an observer. See Section 4.6 for additional details. Another feature implemented in Magnum S14-Series & PS14P(PoE) Convenient www GarrettCom com...
- Page 36 For 10 Mb-to-10 Mb or 10 Mb-to-100Mb or 100Mb-to-10 Mb forwarding, the latency is 15 microseconds plus the packet time at 10 Mb. For 100Mb-to- 100Mb forwarding, the latency is 5 microseconds plus the packet time at 100Mb. www GarrettCom com...
-
Page 37: Features And Benefits
RJ-45 ports and provides a convenient cost-effective power source. Three models for three application environments (S14-series) - Yellow-label for the office and wiring closet - Orange-label, Hardened for the factory floor. - Red-label, premium rated for un-controlled temperatures, outdoors www GarrettCom com... - Page 38 EMI noise sites; e.g industrial or outdoor applications. AC and DC Power Supplies with extended temperature ratings S14-Series power input may be a variety of types, external AC and internal www GarrettCom com...
- Page 39 Terminal block for -48V DC input is a range of 46V to 60V DC. Efficient Compact design, for all-purpose convenient mounting Featuring a compact metal case, Magnum S14-Series & PS14P(POE) can be installed in minimal space in a rack-mount MC14-TRAY, on DIN-Rail (optional) or panel mounting. www GarrettCom com...
-
Page 40: Applications (S14 Series And Ps14P(Poe) Switches)
Port #1 (on the back end) is typically used for an up-stream connection. When expansion is needed, add another S14 and connect it into port #1 with twisted pair cabling to add 3 more ports. www GarrettCom com... - Page 41 Magnum 6K25 W W W . G a r r e t t C o m . C o m GarrettCom Magnum 6K25 10/100/1000 PORT 3 PORT 1...
- Page 42 PLC units are deployed on all the present networks and need an Ethernet port to carry the data to the main workstation being controlled by the Industrial Engineering crews. The hardened version of Magnum S14Hs are typically used where 10/100BASE-T networking equipment is being installed in highly controlled temp environments and www GarrettCom com...
- Page 43 Magnum 6K25 PORT 1 PORT 2 PORT 3 W W W . G a r r e t t C o m . C o m GarrettCom GarrettCom Magnum 6K25 10/100/1000 PORT 2 PORT 3 PORT 1 PORT 4 Magnum S14...
- Page 44 10 Mbps and 100Mbps users and devices unconditionally. The switching capability on all ports provides bandwidth for high performance. The ruggedness of the S14Ps steel case and the high reliability of the design compliments the temperature controlled packaging to provide an exceptional Ethernet product. www GarrettCom com...
- Page 45 Workstations 10Mb Servers 10Mb Servers Laptop computer PORT 3 PORT 1 PORT 2 and Workstations and Workstations IBM Compatible GarrettCom PORT 4 IBM Compatible S14P Convenient Switches provided a secure dependable, reliable solution for un-controlled temp. environment www GarrettCom com...
- Page 46 The cost-effective and efficient Magnum PS14P with its robust enclosure provides a very economical solution through its 4-PoE RJ-45 ports. The Power Source Switch with PoE ports are capable of carrying data, power, and voice over RJ-45 cable using Magnum PS14P(PoE) units. www GarrettCom com...
- Page 47 S14 & PS14P (PoE) Convenient Switches Installation and User Guide Magnum WWW.GarrettCo GarrettCom Magnum 6K25 10/100/1000 PORT PORT PORT Configurable Ethernet Switch Route Route GarrettCom PORT Magnum S14 Convenient Switch IBM Compatible WWW.GarrettCo PORT PORT PORT -48vdc GarrettCom PORT PORT PORT...
- Page 48 The PoE devices used for this industrial application are VOIP for voice, Wireless points for wi-fi connection,and a PoE Clock to synchronize the time with the SNTP server for every second correct timing. www GarrettCom com...
- Page 49 PS14P Power Source Switches used as a reliable cost-effective solution for Wireless points providing Data, Power and Voice over RJ-45 Ports for Industrial application Workstatio Data to PoE devices, e.g PoE Clock, VOIP phone and wireless access point www GarrettCom com...
-
Page 50: Installation
Magnum S-Series allows it to be easily installed in almost any location. Metal mounting clips and screws are included for a rugged and secure mounting in any orientation. An option DIN-Rail bracket is available. www GarrettCom com... - Page 51 The green Power (PWR) Led must turn ON when power is applied through the internal DC input 12V, 24V or –48V DC or external AC through 9V DC jack. www GarrettCom com...
-
Page 52: Mc14-Tray For Rack Mounting Of S14-Series Switches
16 units. (The mounting spaces of the MC14-TRAY are specific to the “S14”-series, and do not permit other models). A typical installation of the model MC14- TRAY, 19” rack-mount tray will hold a few (often three to eight) S14-Series & www GarrettCom com... -
Page 53: Mc14-Tr+Ps9 & Mc14-Tr+Ps9X2 For Rack Mounting
(The MC mounting spaces of the MC14 -TR models are specific to the Magnum S14-Series 10Mbps (FT14 and TB14) and 100Mb (14E) series, and do not permit other models to be put in the tray). www GarrettCom com... - Page 54 MC’s are not used). Metal mounting screws in the bottom-front hold each of the media converters secure in the tray, separately removable for service. The dual LEDs permit viewing operating status of the S14-Sereis Convenient Switches from any angle. www GarrettCom com...
-
Page 55: Din-Rail Mounting Option
A Magnum PS14P(PoE) with -48VDC supply (left) and S14H (right) is shown alongside the DIN-Rail-MC2 bracket The Magnum S14 Models with “HR” have 24VDC power, and have the DIN-Rail-MC2 bracket included and assembled with the MC unit at the factory. www GarrettCom com... -
Page 56: Power Requirements For S14 Series Switches
UL listed Class II power supplies and the detail info is being provided in Technical Specifications Section 1.1. The S14-Series are designed to provide reliable operation, withstand higher temperature environments, and provide the Direct DC power choices to the user to deploy in uncontrolled temperature environments. www GarrettCom com... - Page 57 Note: When connected to a - 48 V centralized dc source these products are to be installed only in Restricted Access Areas (dedicated equipment rooms, electrical closets or the like). www GarrettCom com...
-
Page 58: Powering The S14 Series (Dc Internal) With 12V, 24V Or -48Vdc
The extended temperature capability of the Direct DC-powered S14P’s can go into temperature uncontrolled environments, rated at –40`C to +75`C. The DC jack is also present and optionally can be used with an external P-rated AC power supply to provide “dual source” power input. www GarrettCom com... - Page 59 8 - 15V DC (12V DC) 18 – 36V DC (24V DC) 36 – 60V DC (-48V DC) Input current: 0.8 amp.(12V DC) 0.4 amp max.(24V DC) 0.2 amp max.(-48V DC) Power Consumption: 3 watts typical, 4 watts max. www GarrettCom com...
-
Page 60: S14H & S14P, Dc-Powered, -48Vdc, 24Vdc And 12Vdc Installation
(3) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that the user if desired may ground either of the terminals. The chassis is “earth” or ground (GND). www GarrettCom com... - Page 61 +ve potential lead or -ve potential lead. The more +ve potential lead will connect to the post labeled “+ve” and the rest to the “-ve”. The GND can be hooked up last. When power is applied, the green PWR LED will illuminate. www GarrettCom com...
-
Page 62: Power Requirement For Ps14P(Poe) Power Source Switch
PoE Ports Output voltage: 44 to 57 VDC Over Current Protection, per port: reset able fuse Power Consumption: Typical 3 watts, 4 watts max. Note: Din-Rail mounted, Powerful -48vdc supply used for Magnum PS14P(POE) can be bought directly using this URL: http://www.lanstore.com/ps.htm www GarrettCom com... -
Page 63: Connecting Twisted Pair (Rj-45 Ports)
100Mbps) be used whenever possible in order to provide flexibility in a mixed-speed network, since S14-Series & PS14P(POE) switch ports are auto- cross(MDIX) for either 10 and 100Mbps. Note that the auto-cross function does not operate, if the port is fixed or not supporting auto-negotiation. www GarrettCom com... -
Page 64: Connecting Twisted Pair (Rj-45, Cat 3 Or Cat 5, Unshielded Or Shielded)
For Port # 1 or 1SW, if the LINK LED is not illuminated, move the switch which has a cross-over or up-link for linking to another hub or Switch. www GarrettCom com... -
Page 65: Connections To Nics Which Support Auto-Negotiation, Rj-45 Ports
NIC to the S14-Sereis, it may be necessary to reload the NIC drivers on the user device if the NIC has been communicating with a protocol other than 100BASE-TX (such as 10BASE-T). When 100Mb operation is agreed and in use, the 10/100 LED is illuminated steady ON and is OFF, if 10 Mbps traffic. www GarrettCom com... -
Page 66: Operation
100Mbps Ethernet, and can communicate with 10 Mb domain too. Magnum S14-Series & PS14P(PoE) units are plug-and-play devices. There is no software configuring to be done at installation or for maintenance. The internal functions of both are described below. www GarrettCom com... - Page 67 Packets needed for maintaining the operation of the network (such as occasional multi-cast packets) are forwarded to all ports. The Magnum S14-Series & PS14P(PoE) Convenient Switches operate in the store-and-forward switching mode, which eliminates bad packets and enables peak performance. www GarrettCom com...
-
Page 68: Auto-Cross (Mdix), Auto-Negotiation And Speed-Sensing
In such cases, the 10/100 speed or the F/H mode may be affected, but auto-cross in the www GarrettCom com... - Page 69 IEEE 802.3u standard. Depending upon the devices connected, this will result in agreement to operate at either 10 Mbps or 100Mbps speed, and full- or half-duplex mode. www GarrettCom com...
-
Page 70: Dual Leds, Front-Panel And Side-Panel
LA1, LA2, LA3, & LA4. (Steady On or steady Off indicates no Receive Activity). 10/100 Steady ON for 100Mb speed, OFF for 10Mb speed per port Steady ON for Full duplex mode, OFF for half duplex per port www GarrettCom com... -
Page 71: Troubleshooting
Magnum S14-Series & PS14P(PoE) 10/100 Mb/s Switch is not performing as expected, do not attempt to repair the unit; instead contact your supplier for assistance or contact GarrettCom Customer Support. www GarrettCom com... -
Page 72: Before Calling For Assistance
Verify whether or not the problem is corrected. If not, go to Step 5 below. If the problem is corrected, the Magnum S14-Series & PS14P(PoE) Switch and its associated cables are www GarrettCom com... -
Page 73: When Calling For Assistance
If the problem continues after completing Step 4 above, contact your supplier of the Magnum S14-Series & PS14P(PoE) 10/100 Mb/s Switch unit or if unknown, contact GarrettCom, Inc by fax, phone or email (support@garrettcom.com) for assistance. 5.2 When Calling for Assistance Please be prepared to provide the following information. -
Page 74: Return Material Authorization (Rma) Procedure
Please have the following information readily available: Name and phone number of your contact person. Name of your company / institution Your shipping address Product name Serial Number (or Invoice Number) Packing List Number (or Sales Order Number) Date of installation www GarrettCom com... -
Page 75: Shipping And Packaging Information
(user) charge. 5.4 Shipping and Packaging Information Should you need to ship the unit back to GarrettCom, please follow these instructions: 1. Package the unit carefully. It is recommended that you use the original container if available. Units should be wrapped in a "bubble-wrap" plastic sheet or bag for shipping protection. - Page 76 This material may cause electro-static shock damage to the unit. 2. Clearly mark the Return Material Authorization (RMA) number on the outside of the shipping container. 3. GarrettCom is not responsible for your return shipping charges. 4. Ship the package to: GarrettCom, Inc.
-
Page 77: Appendix A: Warranty Information
GarrettCom, Inc. warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of shipment by GarrettCom. During this warranty period, GarrettCom will repair or, at its option, replace components in the products that prove to be defective at no charge other than shipping and handling, provided that the product is returned pre-paid to GarrettCom.