Table of Contents
Advertisement
Consumer Defined Control Features
FEATURE
OVERVIEW
•
Oven Lockout
•
Temperature Display
Note: The Consumer Defined Control features are adjustments to the
control that will not affect cooking results. These include the Oven
Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout
Feature
The (_
pad controls the Oven Lockout feature. The Oven Lockout feature automatically
locks the oven door and
prevents the Warmer Drawer from being turned on. It does not disable the clock, Kitchen Timer, surface gas burners,
Warmer Zone or the interior oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate
the Oven
Lockout
feature:
1.
Press and hold (_
for three seconds (Fig. 1).
2.
After 3 seconds the lock icon light ( _
) will appear, a beep will
sound and "DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
TO reactivate
normal
oven
operation:
1.
Press and hold (_
for three seconds. A beep will sound.
The "DOOR LOCKED" will continue to flash until the oven door
has completely unlocked and the lock icon light ( _
) will clear
(See Fig. 2).
2.
The range is again fully operational.
(_for
3 seconds
(_for
3 seconds
Figure 1
Figure 2
Setting
Temperature
Display
--
Fahrenheit
or Celsius
The BROIL (_
and CLEAN (_)
pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
PRESS
To change
display
from
Fahrenheit
to Celsius
or
Celsius
to Fahrenheit:
DISPLAY
1.
To tell if the display is set for Fahrenheit or Celsius press and
hold the (_
pad. "BROIL", "550 °" will appear in the display
(See Fig. 3) and continue to HOLD for 7 seconds. A beep will
then sound. If "F" appears, the display is set to show
temperatures in Fahrenheit (Fig. 4). If "C" appears, the display
is set to show temperatures
in Celsius (Fig. 5).
2.
Press (_
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3.
Press _
to accept the change or press _
to reject the
change.
17
(_for7seconds
Figure 3
Figure 4
Figure 5
Hide quick links:
Advertisement
Table of Contents
