Consumer Defined Control Features - Kenmore 790. 4637 Series Use & Care Manual

Consumer Defined Control Features

Setting Temperature Display — Fahrenheit or Celsius:
The BROIL and CLEAN
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press
(figure 1) and hold for 7 seconds; "550°" will appear in
the display and a beep will sound. If "F" appears, the display is
set to show temperatures in Fahrenheit (Figure 2). If "C"
appears, the display is set to show temperatures in Celsius
(Figure 3).
2. Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press to accept the change or press
change.
Setting Silent Control Operation
The START TIME
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be
programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
and hold for 7 seconds. "0:00" will appear and "DELAY"
will flash in the display (Figure 4).
2. Press to switch between normal sound operation and
silent operation mode. The display will show either ":SP" (Figure
5) or ":--" (Figure 6).
If ":SP" appears (Figure 5), the control will operate with normal
sounds and beeps. If ":- -" appears (Figure 6), the control is in
the silent operation mode.
3. Press to accept the change or press
change.
pads control the Fahrenheit or Celsius temperature display modes. The oven
and CLEAN pads control the Silent Control operation feature. The Silent Control operation
PRESS
for 7seconds
to reject the
PRESS
for 7 seconds
to reject the
19
DISPLAY
or
DISPLAY
Figure 4
Figure 5
Figure 6
or
Figure 1
Figure 2
Figure 3