Table of Contents
Advertisement
Consumer Defined Control Features
FEATURE
OVERVIEW
Oven Lockout (Gas Range)
Temperature Display
Note: The Consumer Defined Control features are adjustments to the
control that will not affect cooking results. These include the Oven
Lockout, Temperature Display and Silent Control Operation features.
Setting
Oven
Lockout
Feature
The LOCK (_
pad controls the Oven Lockout feature. The Oven Lockout feature automatically
locks the oven door
and prevents the Warmer Drawer from being turned on. It does not disable the clock, Kitchen Timer, surface gas
burners, Warmer Zone or the interior oven light(s).
INSTRUCTIONS
PRESS
DISPLAY
To activate
the Oven Lockout
feature:
1.
Press and hold (_
for three seconds (Fig. 1).
2.
After 3 seconds the lock icon light ( I1_ ) wilt appear, a beep will
sound and "DOOR LOCKED" will flash in the display. Once the
oven door is locked the "DOOR LOCKED" indicator will stop
flashing and remain on along with the lock icon light.
To reactivate
normal
oven operation:
1.
Press and hold (_
for three seconds. A beep will sound.
The "DOOR LOCKED" will continue to flash until the oven
door has completely unlocked and the lock icon light ( I1_ )
will clear (See Fig. 2).
2.
The range is again fully operational.
(_for
3 seconds
(_for
3 seconds
Figure 1
Figure 2
Setting Temperature
Display--
Fahrenheit
or Celsius
The BROIL (_)
and SELF CLEAN _
pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
PRESS
To change display
from Fahrenheit
to Celsius or
Celsius to Fahrenheit:
DISPLAY
1.
To tell if the display is set for Fahrenheit or Celsius press and
hold the
(_)
pad. "BROIL", "550 °" will appear in the display
(See Fig. 3) and continue to HOLD for 7 seconds. A beep wilt
then sound.
If "F" appears, the display is set to show
temperatures
in Fahrenheit (Fig. 4). If "C" appears, the
display is set to show temperatures
in Celsius (Fig. 5).
2.
Press _
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3.
Press (_
to accept the change or press _
to reject the
change.
_for
7seconds
@
13
Figure 3
Figure 4
Figure 5
Advertisement
Table of Contents
