Consumer Defined Control - Kenmore 790.7890 Use & Care Manual

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include
the Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens can be
locked individually.
To activate the Oven Lockout feature
1. Press or .
2. Press and hold for 3 seconds.
3. After 3 seconds, "DOOR", "LOCKED" will flash and "Loc" will
appear in the display (Fig. 1). Once the oven door is locked the
"DOOR" and "LOCKED" indicator will stop flashing and remain in
the display. Allow 15 seconds for the oven door to lock.
To reactivate normal oven operation:
1. Press or .
2. Press and hold for 3 seconds. "LOC" will disappear from the
display. "DOOR" and "LOCKED" will flash in the display until the
oven door has completely unlocked.
2. The wall oven is again fully operational.
Note: Because you can set the oven lockout individually, the lower oven
can be used when the upper oven lockout feature is on.
Setting Silent Control Operation
The and pads control the Silent Control operation feature. The Silent Control operation feature allows the oven
control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent
operation and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control
operation
1. Press and hold for 7 seconds (Fig. 2). After 6 seconds, "bEEP"
(On) will appear in the display (Fig. 3).
2. Press to switch between normal sound operation (Fig. 3) and
silent operation mode (Fig. 4).
3. Press to accept the change or press
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if the
control is set to silent operation.
INSTRUCTIONS
INSTRUCTIONS
to reject the change.
15
PRESS
or
for 3 seconds
or
for 3 seconds
PRESS
for 7 seconds
or
DISPLAy
Fig. 1
DISPLAy
Fig. 2
Fig. 3
Fig. 4