Consumer Defined Control - Kenmore 790. 9802 series Use & Care Manual

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. The ovens
can be locked individually.
INSTRUCTIONS
To activate the Oven Lockout feature
r
L owe r
1. Press .
O O ven
2. Press and hold
3. After 3 seconds a beep will sound, "DOOR", "LOCKED" will
flash and "Loc" and "LOWER" will appear in the display (Fig.
1). Once the oven door is locked the "DOOR" and "LOCKED"
indicator will stop flashing and remain in the display. Allow 15
seconds for the oven door to lock.
To reactivate normal oven operation:
r
L owe r
1. Press .
O O ven
2. Press and hold
"LOWER" and "LOC" will disappear from the display. "DOOR"
and "LOCKED" will flash in the display until the oven door has
completely unlocked.
3. The appliance is again fully operational.
Note: Because you can set the oven lockout individually, the lower
oven can be used when the upper oven lockout feature is on.
Setting Silent Control Operation
The DELAY START
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
1. Press and hold
beep will sound and "SP" (Speaker) will appear in the display
(Fig. 3).
2. Press to switch between normal sound operation and
silent operation mode.
If "SP" appears (Fig. 3), the control will operate with normal
sounds and beeps. If "- -" appears (Fig. 4), the control is in the
silent operation mode.
3. Press to accept the change or press
change.
Note: The control will always beep at the end of a kitchen timer
setting and will beep when a set temperature has been reached,
even if the control is set to silent operation.
for 3 seconds.
for 3 seconds. A beep will sound.
and FLEX CLEAN
for 6 seconds (Fig. 2). After 6 seconds, a
pads control the Silent Control operation feature. The Silent Control
for 7 seconds
to reject the
17
PRESS
L owe r r
O ven
O
UPPER WARM CONV
for ROAST BAKE BROIL
LOCKED DELAY TIMED
3 seconds
L owe r r
O ven
O
for
3 seconds
PRESS
UPPER WARM CONV
ROAST BAKE BROIL
LOCKED DELAY TIMED
UPPER WARM CONV
ROAST BAKE BROIL
LOCKED DELAY TIMED
UPPER WARM CONV
ROAST BAKE BROIL
LOCKED DELAY TIMED
or
DISPLAY
UPPER LOWER CONV WARM LOWER
TIMER DOOR CLEAN BROIL BAKE ROAST
REMOVE RACKS TIMED DELAY LOCKED
Fig. 1
DISPLAY
UPPER LOWER CONV WARM LOWER
TIMER DOOR CLEAN BROIL BAKE ROAST
REMOVE RACKS TIMED DELAY LOCKED
Fig. 2
UPPER LOWER CONV WARM LOWER
TIMER DOOR CLEAN BROIL BAKE ROAST
REMOVE RACKS TIMED DELAY LOCKED
Fig. 3
UPPER LOWER CONV WARM LOWER
TIMER DOOR CLEAN BROIL BAKE ROAST
REMOVE RACKS TIMED DELAY LOCKED
Fig. 4