Hwl2Man Messages; Hwnetflowman Messages; Hwnetflowman-3; Hwnetflowman-4 - Cisco Catalyst 4500 Series Message Manual

Chapter 2 Messages and Recovery Procedures

HWL2MAN Messages

This section contains the Layer 2 Hardware Manager (HWL2MAN) message.
Error Message C4K_HWL2MAN-3-STMPARITYERROR: Parity error in Spanning Tree Memory.

HWNETFLOWMAN Messages

This section contains the NetFlow Manager (HWNETFLOWMAN) messages.

HWNETFLOWMAN-3

Error Message C4K_HWNETFLOWMAN-3-NETFLOWSTOPPED:Too many netflow parity errors
encountered. It is very likely that this is bad Netflow hardware. Stopping all
netflow related activities.

HWNETFLOWMAN-4

Error Message C4K_HWNETFLOWMAN-4-HARDWAREUNRESPONSIVE: Netflow Hardware too slow in
responding to software requests
Error Message C4K_HWNETFLOWMAN-4-ERRORADDRS:Netflow Fatal Error Info: Interrupt
Status ( [dec] ),
Addr ( [dec] )
OL-11541-01
Explanation There is a parity error in the spanning tree memory, which can indicate a transient
hardware problem or a more permanent problem.
If you see this message too often, reboot the switch.
Recommended Action
Explanation The supervisor engine received too many parity errors from the NetFlow Services Card.
The supervisor engine stops all NetFlow-related activities after issuing this message.
Contact your technical support representative.
Recommended Action
Software tried to access NetFlow hardware but there was no response. Typically this
Explanation
would indicate that the NetFlow related hardware may have gone bad.
Contact your technical support representative.
Recommended Action
FDT1 Err Addr ( [dec] ),
A fatal NetFlow error occurred. The message contains critical information that can help
Explanation
you determine if the NetFlow hardware is functioning properly or is bad.
Contact your technical support representative.
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide Release 12.2(31)SGA
HWL2MAN Messages
FDT2 Err Addr ( [dec] ), FLD Err
2-37