Fuser power cable removal
2. Remove the rear cover. See
more information.
3. Remove the exit guide assembly. See
removal" on page 4-46
4. Remove the two screws (A) from the lower corners of the fuser.
4-32
Service Manual
1. Remove the LVPS/HVPS card. See
card assembly removal" on page 4-41
information.
Note: The cable can be reached and disconnected
without fully removing the card.
"Rear cover removal" on page 4-10
for more information.
A
"LVPS/HVPS
for more
"Paper exit guide assembly
for