Input Roller Clutch And Lever Removal (Autocompensator Clutch) - Dell 1710n - Laser Printer B/W Service Manual

Input roller clutch and lever removal (autocompensator
clutch)
1. Remove the left side cover. See
page 4-9.
2. Place the printer on its right side. Protect the cover from being marred.
3. Remove four screws in the gear train metal cover.
4. Remove the screws (B) from the shaft of the input roller clutch
assembly and the lever (pawl).
5. Remove the clutch assembly and the lever. If the pieces come apart,
they can be easily reassembled if necessary.
4-34
Service Manual
"Left side cover removal" on
A
B