Dell 1710n - Laser Printer B/W Service Manual page 105

Sub error codes (continued)
First 6 bytes sub
error code data
(xx can be any
value)
84 xx 27 x1
x2 x3
84 xx 28 x1
84 xx 29 x1
x2 x3
84 xx 2A 00
00 00
84 xx 2B 00
00 00
Explanation
Manual feeder sensor never became
uncovered from the sheet ahead.
(x1=media size, x2=media source,
x3=last measured gap at input sensor
(gap ahead of PageAhead.))
Media never reached the input sensor,
but was detected at manual feeder
sensor.
(x1=last measured gap at input sensor
(gap ahead of PageAhead.))
Media too long over manual feeder
sensor.
x1=media size, x2=source,
x3=LastDetectedSize
Possible causes include:
• Multiple sheet feed.
• Media too long.
• Media was prestaged.
Media detected in manual feeder sensor
when not expected.
Possible causes include:
• Insertion of paper when motor is
running.
• Prestaged media in tray.
Could not detect the end of a sheet at the
manual feeder sensor.
Possible causes include:
• Very small interpage gap.
• Excessive bounce of manual feeder
sensor.
Diagnostics—E340 and E342n
Possible
error
message
2-73