Fuser Idle Gear Links Removal - Dell 1710n - Laser Printer B/W Service Manual

Fuser idle gear links removal

1. Remove the front access cover. For models E238, E240, and E240n,
see "Front access cover removal (E238, E240, and E240n)" on
page 4-2.
For models E340 and E342n, first perform steps 1 and 2 of
access cover removal (E340 and E342n)" on page
enough slack in the cable to remove the cover without disconnecting
the cable, then follow the instructions for E238, E240, and E240n
models.
2. Remove the left side cover. See
page 4-9.
3. Place printer on its right side. Protect the cover from being marred.
4. Remove the screws (A) securing the metal plate covering the gear
train.
4-30
Service Manual
"Left side cover removal" on
A
"Front
4-5. Gently pull