Input Tray Tests - Dell 1710n - Laser Printer B/W Service Manual

DMA Background Error
Clear Init Rise Error
False Init Rise Error
False Init Fail Error
Autofeed Rising Interrupt Error
Clear Autofeed Rise Error
False Autofeed Rise Error
Autofeed Failing Interrupt Error
Clear Autofeed Fail Error
6. Once the maximum count is reached, the test stops. The power
indicator goes on solid, and the final results display.
Press Return or Stop to exit the test.

Input tray tests

Feed Tests (input tray)
These tests are used to determine if the input tray sensors are working
correctly. Observe the paper path as blank media is being fed through the
printer. The front access door cannot be opened during the feed test. To
observe the paper path, open the door cover to access the manual feeder.
Any media that meets the specifications for the printer can be used for this
test.
To run the Input Tray Feed Test:
1. Open the manual feeder door.
Note: Do not open the front cover.
2. Select the Feed Test from the INPUT TRAY TESTS menu.
3. Select the input source. Only installed sources display, but may include
Tray 1, Tray 2, and Manual Feeder.
4. Select Single to feed a single blank sheet or Continuous to feed blank
sheets until you press Return or Stop.
The selected input source appears on the display:
<input source>
Feeding...
3-26
Service Manual