Controller Card Service Check - Dell 1710n - Laser Printer B/W Service Manual

Service manual
Hide thumbs Also See for 1710n - Laser Printer B/W:
Table of Contents

Advertisement

Controller card service check

Controller card service check
FRU
Controller card
assembly
2-82
Service Manual
Action
POST (Power-On Self Test)
Note: With all cables connected, the printer
should complete POST within approximately 30
seconds in the following sequence:
• For models E238, E240, and E240n, see
"Power-On Self Test (POST) sequence" on
page
2-2. If some lights are on or flashing see
"Common primary light patterns" on
page 2-4
to determine action required.
• For models E340 and E342n, see
On Self Test (POST) sequence" on
page
2-50. If error messages are posted, see
"Messages and error codes" on page
If the printer fails to complete POST without
displaying an error message, replace the
controller card assembly.
Note: Settings for U.S. versus
non–U.S. and the printer configuration ID can be
changed. For models E238, E240, and E240n,
see
"Defaults" on page 3-12
"Configuration ID" on page
E340 and E342n see
and
"Configuration ID" on page
"Power–
and
3-12. For models
"Defaults" on page 3-29
3-30.
2-55.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents