Delete Memory Bank; Scan; Start Scan; Memory Data Setting - AOR AR2300 Operating Manual

4-4-5 Delete memory bank

MB

4-5 SCAN

4-5-1 Start scan

MS
If the memory frequency is registered to pass frequency lit, it will be skipped.
LC

4-5-2 Memory data setting

MG
BK
Note: The DL, FR, BK commands cannot be used alone.
They must always be used in conjunction with the MG command.
To read: MGnn<CR>
Response: MGnn DLnn FRnn BKxxxxxx...xxxx

4-5-3 Memory pass

MP
To read: MP<CR>
Response: MPn
MBnn:
nn: Memory channel
MSnn
LCn:
MGnn DLnn FRnn BKxxxxxx...xxxx
The AR2300 features 20 scan groups.
nn: 00 ~ 19 (Scan bank number) (default: 00)
MGnn:
nn: 01 ~ 99 (Squelch delay time) (in 0.1 sec.)
DLnn:
(between squelch closing and scan restart) (default: 20)
nn: 00 ~ 60 (Free scan) (in 1 second)
FRnn:
(default: 00
(duration is how long the AR2300 will remain on
active frequency before resuming scan even when the
frequency is still active).
BKxxxxxx....xxxx: Linked bank number
(Example: Link 02
(Note: Scan bank 00 cannot be linked.)
To delete bank, enter BK<CR>.
n: 0, 1
MPn:
MPnn: nn: 00 ~ 39 (memory bank)
Memory pass cancel on the selected bank
nn: Bank number
n : 0, 1
0: No report (default)
1: Output detected frequency information
Off)
05 11, then BK020511.
0: Pass Off
1: Pass
36