Stitch Length Control; Adjusting Stretch Stitch Balance; Reverse Stitch Control - Kenmore 384.18024000 Owner's Manual

Stitch Length Control
(how to adjust
the stitch
length)
Turn the stitch length control until the desired number is shown
at the indicating mark.
(Set the stitch length control at S.S. when using the stretch stitch.)
The larger the number, the greater the stitch length.
_,'_==_,'._ mark shows the adjustment range when sewing the
buttonhole.
* Raise the presser foot before turning the stitch length control.
_) Indicating mark
Adjusting
Stretch Stitch Balance
If stretch stitch patterns are uneven when you sew on a
particular fabric, adjust them with the feed balancing dial.
To adjust distorted patterns
[] If patterns are drawn out, correct by turning the dial in the
direction of "-".
[] If patterns are compressed, correct by turning the dial in
the direction of "+'.
[]
[]
Reverse Stitch Control
Sewing will be made in reverse while the reverse stitch control is
pressed.
35