Pressure Adjusting Lever; Presser Foot Lifter; Thread Cutter; Extension Table - Kenmore 384.18024000 Owner's Manual

Pressure
Adjusting
Lever
Pressure adjusting lever
The pressure adjusting lever should be set at "3" for regular
sewing.
Reduce pressure to "2" for applique, cut work, draw work and
basting.
Set pressure at "1" when sewing chiffon, lace, organdy and
other fine fabdcs. Velour and knits with a lot of stretch may also
require pressure at "1".
!
Presser Foot Lifter
_) Presser foot lifter
Normal up position
_) Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4"(0.6 cm) higher than the normal up
position for easy removal of the presser foot or to help you
place heavy fabric under the foot.
Thread Cutter
Thread cutter
You do not need a pair of scissors to cut threads after sewing.
Just use the built-in thread cutter.
Extension Table
Detaching the table:
Pull the table away from the machine, as illustrated.
Attaching the table:
Push the extension table until it snaps into the machine.
_) Extension table
Projection
_) Hole
Accessory Box
Open the cover of the accessory box toward you. Sewing
accessories are conveniently located in the box.
15