Table of Contents
Advertisement
Applique
(_) Stitch selector:
5
Stitch width:
2 to 6.5
(_ Stitch length:
0.5 to 1
_) Needle thread tension:
2 to 6
Presser foot F:
Satin stitch foot
Pressure adjusting lever: 2
WIDTH
LENGTH
_
_
Baste applique pieces on the fabric, or fuse the applique
pieces with iron-on fabric joiner. Stitch around the applique
making sure the needle falls along the raw edge of the
applique.
Embroidery
(_) Stitch selector:
5
(_) Stitch width:
1 to 6.5
(_ Stitch length:
Any
(_ Needle thread tension:
2 to 6
(_ Feed dogs:
Dropped
*Presser foot:
Remove
WIDTH
LENGTH
®
Drop the feed dogs and remove the foot holder. Adjust stitch
width as desired. Draw a design onto the fabric with tailor's
chalk. Stretch the fabric between embroidery hoops and place
under the needle.
Lower the Presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate the
handwheet counterclockwise
for one complete turn.
Pull the needle thread to draw the bobbin thread to the right
side of the fabric. At medium speed, stitch along the marked
outline, guiding the fabric carefully by hand. After embroidery
is completed, raise the feed dogs for normal sewing.
79
Hide quick links:
Advertisement
Table of Contents
